[PATCH 1/1] mxc_nand : add RESET command support

[Eric Benard]

mxc_nand driver must support the RESET Command in order to support
Micron NAND which need a reset before any other command.

Signed-off-by: Eric Benard <eric at eukrea.com>
---
 drivers/mtd/nand/mxc_nand.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index d5445cd..0207525 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -638,6 +638,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 
 	case NAND_CMD_ERASE1:
 	case NAND_CMD_ERASE2:
+	case NAND_CMD_RESET:
 		send_cmd(host, command, false);
 		mxc_do_addr_cycle(mtd, column, page_addr);
 
-- 
1.6.3.3