[PATCH-v6 0/4] OMAP: Adding flash support to SDP, ZOOM2 and LDP boards

[Vimal Singh]

>> >> From 8bc97108cf9c78216f1ea5407ccbd900e6b63dc2 Mon Sep 17 00:00:00 2001
>> >> From: Vimal Singh <vimalsingh at ti.com>
>> >> Date: Thu, 19 Nov 2009 19:28:11 +0530
>> >>
>> >> This patch series adds flash support for NAND (in sdp, zoom and ldp),
>> >> OneNAND and NOR (in sdp)
>> >>
>> >> Tested on Zoom2 and 3430SDP
>> >>
>> >> Vimal Singh (4):
>> >> [PATCH-v6 1/4] OMAP2/3: Add support for flash on SDP boards
>> >> [PATCH-v6 2/4] OMAP3: Add support for NAND on ZOOM/LDP boards
>> >> [PATCH-v6 3/4] OMAP: Zoom2: Enable NAND and JFFS2 support in defconfig
>> >> [PATCH-v6 4/4] OMAP: 3430SDP: Enable NAND in defconfig
>> >

I am going to re-post this patch series again and this time I have
divided this into 3 (for more convenience in reviewing) . Something
like this:

1st series:
This patch series will introduce generic gpmc-nand.c for nand device
related gpmc init.

2nd series:
This patch series will introduce 'board-sdp-flash.c', for flash
devices init on SDP
boards. And will give an example of using 'gpmc-nand.c' and
'board-sdp-flash.c' by
adding flash support to 3430SDP board.

3rd:
This series introduces 'board-zoom-flash.c' for NAND init in ZOOM boards.
Other patches will add NAND support for ZOOM2, ZOOM3 and LDP.

Tony,
Is it ok with you?

-- 
Regards,
Vimal Singh