[PATCH-v3 1:2] [MTD][NAND]omap: Adding support for nand prefetch-read and post-write, in MPU mode.
vimal singh
vimal.newwork at gmail.com
Tue Aug 11 01:45:45 EDT 2009
On Mon, Aug 10, 2009 at 9:57 PM, Tony Lindgren<tony at atomide.com> wrote:
> * vimal singh <vimalsingh at ti.com> [090713 13:56]:
>> Patch updated for ' ioreadX / iowriteX and ioreadX_rep / iowriteX_rep' as per
>> David Brownell's comment. I updated 'omap_(read/write)_buf16' fucntions also
>> for this.
>>
>> -vimal
>>
>> This patch adds prefetch support to access nand flash in mpu mode.
>> This patch also adds 8-bit nand support (omap_read/write_buf8).
>> Prefetch can be used for both 8- and 16-bit devices.
>>
>> Signed-off-by: Vimal Singh <vimalsingh at ti.com>
>
> Sorry for the delay. I've looked at the GPMC part, and that now looks OK
> to me. So I'm OK for this to get integrated via the MTD list.
>
> Acked-by: Tony Lindgren <tony at atomide.com>
>
Can you give your ack to below patch too?
http://lists.infradead.org/pipermail/linux-mtd/2009-July/026373.html
>
>> ---
>>
>> ---
>> arch/arm/mach-omap2/gpmc.c | 63 ++++++++++++
>> arch/arm/plat-omap/include/mach/gpmc.h | 4
>> drivers/mtd/nand/Kconfig | 8 +
>> drivers/mtd/nand/omap2.c | 161 +++++++++++++++++++++++++++++++--
>> 4 files changed, 226 insertions(+), 10 deletions(-)
>>
>> Index: mtd-2.6/arch/arm/mach-omap2/gpmc.c
>> ===================================================================
>> --- mtd-2.6.orig/arch/arm/mach-omap2/gpmc.c
>> +++ mtd-2.6/arch/arm/mach-omap2/gpmc.c
>> @@ -57,6 +57,11 @@
>> #define GPMC_CHUNK_SHIFT 24 /* 16 MB */
>> #define GPMC_SECTION_SHIFT 28 /* 128 MB */
>>
>> +#define PREFETCH_FIFOTHRESHOLD (0x40 << 8)
>> +#define CS_NUM_SHIFT 24
>> +#define ENABLE_PREFETCH (0x1 << 7)
>> +#define DMA_MPU_MODE 2
>> +
>> static struct resource gpmc_mem_root;
>> static struct resource gpmc_cs_mem[GPMC_CS_NUM];
>> static DEFINE_SPINLOCK(gpmc_mem_lock);
>> @@ -386,6 +391,63 @@ void gpmc_cs_free(int cs)
>> }
>> EXPORT_SYMBOL(gpmc_cs_free);
>>
>> +/**
>> + * gpmc_prefetch_enable - configures and starts prefetch transfer
>> + * @cs: nand cs (chip select) number
>> + * @dma_mode: dma mode enable (1) or disable (0)
>> + * @u32_count: number of bytes to be transferred
>> + * @is_write: prefetch read(0) or write post(1) mode
>> + */
>> +int gpmc_prefetch_enable(int cs, int dma_mode,
>> + unsigned int u32_count, int is_write)
>> +{
>> + uint32_t prefetch_config1;
>> +
>> + if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
>> + /* Set the amount of bytes to be prefetched */
>> + gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
>> +
>> + /* Set dma/mpu mode, the prefetch read / post write and
>> + * enable the engine. Set which cs is has requested for.
>> + */
>> + prefetch_config1 = ((cs << CS_NUM_SHIFT) |
>> + PREFETCH_FIFOTHRESHOLD |
>> + ENABLE_PREFETCH |
>> + (dma_mode << DMA_MPU_MODE) |
>> + (0x1 & is_write));
>> + gpmc_write_reg(GPMC_PREFETCH_CONFIG1, prefetch_config1);
>> + } else {
>> + return -EBUSY;
>> + }
>> + /* Start the prefetch engine */
>> + gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL(gpmc_prefetch_enable);
>> +
>> +/**
>> + * gpmc_prefetch_reset - disables and stops the prefetch engine
>> + */
>> +void gpmc_prefetch_reset(void)
>> +{
>> + /* Stop the PFPW engine */
>> + gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
>> +
>> + /* Reset/disable the PFPW engine */
>> + gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
>> +}
>> +EXPORT_SYMBOL(gpmc_prefetch_reset);
>> +
>> +/**
>> + * gpmc_prefetch_status - reads prefetch status of engine
>> + */
>> +int gpmc_prefetch_status(void)
>> +{
>> + return gpmc_read_reg(GPMC_PREFETCH_STATUS);
>> +}
>> +EXPORT_SYMBOL(gpmc_prefetch_status);
>> +
>> static void __init gpmc_mem_init(void)
>> {
>> int cs;
>> @@ -452,6 +514,5 @@ void __init gpmc_init(void)
>> l &= 0x03 << 3;
>> l |= (0x02 << 3) | (1 << 0);
>> gpmc_write_reg(GPMC_SYSCONFIG, l);
>> -
>> gpmc_mem_init();
>> }
>> Index: mtd-2.6/arch/arm/plat-omap/include/mach/gpmc.h
>> ===================================================================
>> --- mtd-2.6.orig/arch/arm/plat-omap/include/mach/gpmc.h
>> +++ mtd-2.6/arch/arm/plat-omap/include/mach/gpmc.h
>> @@ -103,6 +103,10 @@ extern int gpmc_cs_request(int cs, unsig
>> extern void gpmc_cs_free(int cs);
>> extern int gpmc_cs_set_reserved(int cs, int reserved);
>> extern int gpmc_cs_reserved(int cs);
>> +extern int gpmc_prefetch_enable(int cs, int dma_mode,
>> + unsigned int u32_count, int is_write);
>> +extern void gpmc_prefetch_reset(void);
>> +extern int gpmc_prefetch_status(void);
>> extern void __init gpmc_init(void);
>>
>> #endif
>> Index: mtd-2.6/drivers/mtd/nand/Kconfig
>> ===================================================================
>> --- mtd-2.6.orig/drivers/mtd/nand/Kconfig
>> +++ mtd-2.6/drivers/mtd/nand/Kconfig
>> @@ -80,6 +80,14 @@ config MTD_NAND_OMAP2
>> help
>> Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
>>
>> +config MTD_NAND_OMAP_PREFETCH
>> + bool "GPMC prefetch support for NAND Flash device"
>> + depends on MTD_NAND && MTD_NAND_OMAP2
>> + default y
>> + help
>> + The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
>> + to improve the performance.
>> +
>> config MTD_NAND_TS7250
>> tristate "NAND Flash device on TS-7250 board"
>> depends on MACH_TS72XX
>> Index: mtd-2.6/drivers/mtd/nand/omap2.c
>> ===================================================================
>> --- mtd-2.6.orig/drivers/mtd/nand/omap2.c
>> +++ mtd-2.6/drivers/mtd/nand/omap2.c
>> @@ -112,6 +112,16 @@
>> static const char *part_probes[] = { "cmdlinepart", NULL };
>> #endif
>>
>> +#ifdef CONFIG_MTD_NAND_OMAP_PREFETCH
>> +static int use_prefetch = 1;
>> +
>> +/* "modprobe ... use_prefetch=0" etc */
>> +module_param(use_prefetch, bool, 0);
>> +MODULE_PARM_DESC(use_prefetch, "enable/disable use of PREFETCH");
>> +#else
>> +const int use_prefetch;
>> +#endif
>> +
>> struct omap_nand_info {
>> struct nand_hw_control controller;
>> struct omap_nand_platform_data *pdata;
>> @@ -124,6 +134,7 @@ struct omap_nand_info {
>> unsigned long phys_base;
>> void __iomem *gpmc_cs_baseaddr;
>> void __iomem *gpmc_baseaddr;
>> + void __iomem *nand_pref_fifo_add;
>> };
>>
>> /**
>> @@ -189,6 +200,38 @@ static void omap_hwcontrol(struct mtd_in
>> }
>>
>> /**
>> + * omap_read_buf8 - read data from NAND controller into buffer
>> + * @mtd: MTD device structure
>> + * @buf: buffer to store date
>> + * @len: number of bytes to read
>> + */
>> +static void omap_read_buf8(struct mtd_info *mtd, u_char *buf, int len)
>> +{
>> + struct nand_chip *nand = mtd->priv;
>> +
>> + ioread8_rep(nand->IO_ADDR_R, buf, len);
>> +}
>> +
>> +/**
>> + * omap_write_buf8 - write buffer to NAND controller
>> + * @mtd: MTD device structure
>> + * @buf: data buffer
>> + * @len: number of bytes to write
>> + */
>> +static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
>> +{
>> + struct omap_nand_info *info = container_of(mtd,
>> + struct omap_nand_info, mtd);
>> + u_char *p = (u_char *)buf;
>> +
>> + while (len--) {
>> + iowrite8(*p++, info->nand.IO_ADDR_W);
>> + while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
>> + GPMC_STATUS) & GPMC_BUF_FULL));
>> + }
>> +}
>> +
>> +/**
>> * omap_read_buf16 - read data from NAND controller into buffer
>> * @mtd: MTD device structure
>> * @buf: buffer to store date
>> @@ -198,7 +241,7 @@ static void omap_read_buf16(struct mtd_i
>> {
>> struct nand_chip *nand = mtd->priv;
>>
>> - __raw_readsw(nand->IO_ADDR_R, buf, len / 2);
>> + ioread16_rep(nand->IO_ADDR_R, buf, len / 2);
>> }
>>
>> /**
>> @@ -217,13 +260,101 @@ static void omap_write_buf16(struct mtd_
>> len >>= 1;
>>
>> while (len--) {
>> - writew(*p++, info->nand.IO_ADDR_W);
>> + iowrite16(*p++, info->nand.IO_ADDR_W);
>>
>> while (GPMC_BUF_EMPTY == (readl(info->gpmc_baseaddr +
>> GPMC_STATUS) & GPMC_BUF_FULL))
>> ;
>> }
>> }
>> +
>> +/**
>> + * omap_read_buf_pref - read data from NAND controller into buffer
>> + * @mtd: MTD device structure
>> + * @buf: buffer to store date
>> + * @len: number of bytes to read
>> + */
>> +static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
>> +{
>> + struct omap_nand_info *info = container_of(mtd,
>> + struct omap_nand_info, mtd);
>> + uint32_t pfpw_status = 0, r_count = 0;
>> + int ret = 0;
>> + u32 *p = (u32 *)buf;
>> +
>> + /* take care of subpage reads */
>> + for (; len % 4 != 0; ) {
>> + *buf++ = __raw_readb(info->nand.IO_ADDR_R);
>> + len--;
>> + }
>> + p = (u32 *) buf;
>> +
>> + /* configure and start prefetch transfer */
>> + ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
>> + if (ret) {
>> + /* PFPW engine is busy, use cpu copy method */
>> + if (info->nand.options & NAND_BUSWIDTH_16)
>> + omap_read_buf16(mtd, buf, len);
>> + else
>> + omap_read_buf8(mtd, buf, len);
>> + } else {
>> + do {
>> + pfpw_status = gpmc_prefetch_status();
>> + r_count = ((pfpw_status >> 24) & 0x7F) >> 2;
>> + ioread32_rep(info->nand_pref_fifo_add, p, r_count);
>> + p += r_count;
>> + len -= r_count << 2;
>> + } while (len);
>> +
>> + /* disable and stop the PFPW engine */
>> + gpmc_prefetch_reset();
>> + }
>> +}
>> +
>> +/**
>> + * omap_write_buf_pref - write buffer to NAND controller
>> + * @mtd: MTD device structure
>> + * @buf: data buffer
>> + * @len: number of bytes to write
>> + */
>> +static void omap_write_buf_pref(struct mtd_info *mtd,
>> + const u_char *buf, int len)
>> +{
>> + struct omap_nand_info *info = container_of(mtd,
>> + struct omap_nand_info, mtd);
>> + uint32_t pfpw_status = 0, w_count = 0;
>> + int i = 0, ret = 0;
>> + u16 *p = (u16 *) buf;
>> +
>> + /* take care of subpage writes */
>> + if (len % 2 != 0) {
>> + writeb(*buf, info->nand.IO_ADDR_R);
>> + p = (u16 *)(buf + 1);
>> + len--;
>> + }
>> +
>> + /* configure and start prefetch transfer */
>> + ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
>> + if (ret) {
>> + /* PFPW engine is busy, use cpu copy method */
>> + if (info->nand.options & NAND_BUSWIDTH_16)
>> + omap_write_buf16(mtd, buf, len);
>> + else
>> + omap_write_buf8(mtd, buf, len);
>> + } else {
>> + pfpw_status = gpmc_prefetch_status();
>> + while (pfpw_status & 0x3FFF) {
>> + w_count = ((pfpw_status >> 24) & 0x7F) >> 1;
>> + for (i = 0; (i < w_count) && len; i++, len -= 2)
>> + iowrite16(*p++, info->nand_pref_fifo_add);
>> + pfpw_status = gpmc_prefetch_status();
>> + }
>> +
>> + /* disable and stop the PFPW engine */
>> + gpmc_prefetch_reset();
>> + }
>> +}
>> +
>> /**
>> * omap_verify_buf - Verify chip data against buffer
>> * @mtd: MTD device structure
>> @@ -658,17 +789,12 @@ static int __devinit omap_nand_probe(str
>> err = -ENOMEM;
>> goto out_release_mem_region;
>> }
>> +
>> info->nand.controller = &info->controller;
>>
>> info->nand.IO_ADDR_W = info->nand.IO_ADDR_R;
>> info->nand.cmd_ctrl = omap_hwcontrol;
>>
>> - /* REVISIT: only supports 16-bit NAND flash */
>> -
>> - info->nand.read_buf = omap_read_buf16;
>> - info->nand.write_buf = omap_write_buf16;
>> - info->nand.verify_buf = omap_verify_buf;
>> -
>> /*
>> * If RDY/BSY line is connected to OMAP then use the omap ready
>> * funcrtion and the generic nand_wait function which reads the status
>> @@ -689,6 +815,23 @@ static int __devinit omap_nand_probe(str
>> == 0x1000)
>> info->nand.options |= NAND_BUSWIDTH_16;
>>
>> + if (use_prefetch) {
>> + /* copy the virtual address of nand base for fifo access */
>> + info->nand_pref_fifo_add = info->nand.IO_ADDR_R;
>> +
>> + info->nand.read_buf = omap_read_buf_pref;
>> + info->nand.write_buf = omap_write_buf_pref;
>> + } else {
>> + if (info->nand.options & NAND_BUSWIDTH_16) {
>> + info->nand.read_buf = omap_read_buf16;
>> + info->nand.write_buf = omap_write_buf16;
>> + } else {
>> + info->nand.read_buf = omap_read_buf8;
>> + info->nand.write_buf = omap_write_buf8;
>> + }
>> + }
>> + info->nand.verify_buf = omap_verify_buf;
>> +
>> #ifdef CONFIG_MTD_NAND_OMAP_HWECC
>> info->nand.ecc.bytes = 3;
>> info->nand.ecc.size = 512;
>> @@ -746,7 +889,7 @@ static int omap_nand_remove(struct platf
>> platform_set_drvdata(pdev, NULL);
>> /* Release NAND device, its internal structures and partitions */
>> nand_release(&info->mtd);
>> - iounmap(info->nand.IO_ADDR_R);
>> + iounmap(info->nand_pref_fifo_add);
>> kfree(&info->mtd);
>> return 0;
>> }
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
---
Regards,
\/ | |\/| /-\ |_
____ __o
------ -\<,
----- ( )/ ( )
More information about the linux-mtd
mailing list