[PATCH] tmio_nand: fix base address programming
Dmitry Baryshkov
dbaryshkov at gmail.com
Thu Sep 4 08:27:44 EDT 2008
Fix offset of second word used for programming base address of memory
window. Also program tmio with offset of the FCR, not with physical
memory location.
Signed-off-by: Dmitry Baryshkov <dbaryshkov at gmail.com>
Cc: Ian Molton <spyro at f2s.com>
---
drivers/mtd/nand/tmio_nand.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index cbab654..edb1e32 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -109,7 +109,7 @@ struct tmio_nand {
void __iomem *ccr;
void __iomem *fcr;
- unsigned long fcr_phys;
+ unsigned long fcr_base;
unsigned int irq;
@@ -316,8 +316,8 @@ static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
tmio_iowrite8(0x81, tmio->ccr + CCR_ICC);
/* (10h)BaseAddress 0x1000 spba.spba2 */
- tmio_iowrite16(tmio->fcr_phys, tmio->ccr + CCR_BASE);
- tmio_iowrite16(tmio->fcr_phys >> 16, tmio->ccr + CCR_BASE + 16);
+ tmio_iowrite16(tmio->fcr_base, tmio->ccr + CCR_BASE);
+ tmio_iowrite16(tmio->fcr_base >> 16, tmio->ccr + CCR_BASE + 2);
/* (04h)Command Register I/O spcmd */
tmio_iowrite8(0x02, tmio->ccr + CCR_COMMAND);
@@ -395,7 +395,7 @@ static int tmio_probe(struct platform_device *dev)
goto err_iomap_ccr;
}
- tmio->fcr_phys = (unsigned long)fcr->start;
+ tmio->fcr_base = fcr->start & 0xfffff;
tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1);
if (!tmio->fcr) {
retval = -EIO;
--
1.5.6.5
More information about the linux-mtd
mailing list