[PATCH] [MTD] m25p80.c erase enhance (v2)

Chen Gong g.chen at freescale.com
Mon Oct 20 23:15:09 EDT 2008


To avoid confusion, according to the suggestion from
David Brownell <david-b at pacbell.net>, cleanup some
terminology as follows:

OPCODE_BE   ==> OPCODE_CHIP_ERASE
erase_block ==> erase_chip

Signed-Off-by: Chen Gong <clumsycg at gmail.com>
---
 drivers/mtd/devices/m25p80.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 76a7675..b95aadf 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -39,7 +39,7 @@
 #define	OPCODE_PP		0x02	/* Page program (up to 256 bytes) */
 #define	OPCODE_BE_4K 		0x20	/* Erase 4KiB block */
 #define	OPCODE_BE_32K		0x52	/* Erase 32KiB block */
-#define	OPCODE_BE		0xc7	/* Erase whole flash block */
+#define	OPCODE_CHIP_ERASE	0xc7	/* Erase whole flash block */
 #define	OPCODE_SE		0xd8	/* Sector erase (usually 64KiB) */
 #define	OPCODE_RDID		0x9f	/* Read JEDEC ID */
 
@@ -167,7 +167,7 @@ static int wait_till_ready(struct m25p *flash)
  *
  * Returns 0 if successful, non-zero otherwise.
  */
-static int erase_block(struct m25p *flash)
+static int erase_chip(struct m25p *flash)
 {
 	DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB\n",
 			flash->spi->dev.bus_id, __func__,
@@ -181,7 +181,7 @@ static int erase_block(struct m25p *flash)
 	write_enable(flash);
 
 	/* Set up command buffer. */
-	flash->command[0] = OPCODE_BE;
+	flash->command[0] = OPCODE_CHIP_ERASE;
 
 	spi_write(flash->spi, flash->command, 1);
 
@@ -255,7 +255,7 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
 	 */
 
 	/* now erase those sectors */
-	if (len == flash->mtd.size && erase_block(flash)) {
+	if (len == flash->mtd.size && erase_chip(flash)) {
 		instr->state = MTD_ERASE_FAILED;
 		mutex_unlock(&flash->lock);
 		return -EIO;
-- 
1.5.4




More information about the linux-mtd mailing list