MTD Erase Size usage in JFFS2

[Ravi Vasarla]

I think would have to create different images where as have to specify
correct erase block size to give the better results.

Regards,
Ravi 

-----Original Message-----
From: linux-mtd-bounces at lists.infradead.org
[mailto:linux-mtd-bounces at lists.infradead.org] On Behalf Of Ramgopal
Kota
Sent: Wednesday, October 08, 2008 12:33 PM
To: linux-mtd at lists.infradead.org
Subject: MTD Erase Size usage in JFFS2

Hi,

our board is having a 8MB flash and we are using JFFS2 as a image
storage.
Due to lead times we decided to use 4 vendors flash chips of same size,
they all work fine.
Each flash chip has different sector sizes.

 As part of  manufacturing  process, we took a working image on  one
flash and burn it in all  different vendor flashes,  due to sector size
mishap  they are not working as intended.

I want to know if I can specify something similar to "-e" option in
mkfs.jffs2 where I can specify the block size.

Thanks and Regards,
Ramgopal Kota


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
SASKEN BUSINESS DISCLAIMER
-------------------------
This message may contain confidential, proprietary or legally privileged information. In 
case you are not the original intended Recipient of the message, you must not, directly or 
indirectly, use, Disclose, distribute, print, or copy any part of this message and you are 
requested to delete it and inform the sender. Any views expressed in this message are 
those of the individual sender unless otherwise stated. Nothing contained in this message 
shall be construed as an offer or acceptance of any offer by Sasken Communication 
Technologies Limited ("Sasken") unless sent with that express intent and with due 
authority of Sasken. Sasken has taken enough precautions to prevent the spread of 
viruses. However the company accepts no liability for any damage caused by any virus 
transmitted by this email