Help needed with MTD on AT91SAM9263-EK please.

[michael]

Hi,
Richard Genoud wrote:
> 2008/5/23 James <jamessteward at optusnet.com.au>:
>   
>> What tool chain are you using?
>>     
> i think it was buildroot + gcc3.4.6 and glib2.3.2, but i'm not sure.
>
> On Fri, 2008-05-23 at 09:03 +0200, Alessandro Rubini wrote:
>   
>> So you should only write the boot code with sam-ba, and write your
>> kernel and filesystem from either u-boot or linux. You'll probably
>> want to erase and re-program the boot loader from itself, to get rid
>> of remaining wrong sam-ba bits.
>>     
> I agree with Alessandro, don't rely to much on sam-ba for nand writing.
> That's why I asked you to do the test from linux (erase/mount/write/read)
>
>   
I'm agree too, but my customers use sam-ba to write (linux, u-boot
and jffs2 filesystem) without problems.

Regards
Michael