OF compatible MTD platform RAM driver ?

[Laurent Pinchart]

On Tuesday 11 March 2008 01:45, David Gibson wrote:
> On Mon, Mar 10, 2008 at 12:00:22PM -0500, Rune Torgersen wrote:
> > linuxppc-dev-bounces+runet=innovsys.com at ozlabs.org wrote:
> > > Hi everybody,
> > >
> > > as part of a ARCH=ppc to ARCH=powerpc migration process, I'm
> > > looking for an
> > > OpenFirmware compatible way to handle a RAM-based MTD device.
> > >
> > > On the platform_device based ppc architecture, the
> > > drivers/mtd/maps/plat-ram.c
> > > driver handled "mtd-ram" platform devices. There is no such
> > > driver for the
> > > OF-based powerpc architecture.
> > >
> > > As a temporary workaround I hacked the physmap_of driver to
> > > handle "direct-mapped" OF devices oh type "ram" by adding a
> > > corresponding entry in the of_flash_match[] array. This seems to work
> > > fine.
> > >
> > > What would be the preferred way to handle OF-compatible RAM-based MTD
> > > devices ? The 3 ways I can think of are
> > >
> > > 1. porting the plat-ram driver to OF (the driver isn't used
> > > in the kernel tree
> > > but I suspect it is used by out-of-tree boards)
> > >
> > > 2. creating a new plat-ram-of driver, much like the
> > > physmap_of driver comes
> > > from the physmap driver
> > >
> > > 3. extending the physmap_of driver to handle RAM devices (in
> > > which case
> > > references to "flash" in the function names should probably
> > > be replaced
> > > by "mtd")
> > >
> > > I live option 3 better so far.
> > >
> > > Has anyone already worked on this ? Is there any defined
> > > device tree mapping
> > > for MTD RAM devices ?
> >
> > We ran ito the same issue.
> > We did option 3, as it was efinetly the easiest,
>
> I think this is the best option in principle.

I'll implement that and post a patch after completing the ppc-to-powerpc 
migration.

> > here is the sram entry in our dts:
>
> Except that your implementation of it is not good.
>
> You're relying on the old obsolete flash binding with the "probe-type"
> field.  The solution should be adapted to the new approach which uses
> values in the "compatible" field to indicate various sorts of flash
> device.

What "compatible" values should I use for ROM and RAM mappings ?

Best regards,

-- 
Laurent Pinchart
CSE Semaphore Belgium

Chaussée de Bruxelles, 732A
B-1410 Waterloo
Belgium

T +32 (2) 387 42 59
F +32 (2) 387 42 75
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.infradead.org/pipermail/linux-mtd/attachments/20080311/9a7e9e83/attachment.bin