[PATCH 2/3] atmel_nand: Work around AT32AP7000 ECC errata

[Andrew Victor]

hi Haavard,

> The ALE signal isn't correctly wired up to the ECC controller on the
> AP7000, so it starts calculating ECC during the address cycles.

Shouldn't affect the AT91's, so
  Acked-by: Andrew Victor <linux at maxim.org.za>

You might want to also change/remove the comment where the ECC hwctl()
function is registered.
It's currently:
   nand_chip->ecc.hwctl = at91_nand_hwctl;     /* unused */


Regards,
  Andrew Victor