insmod modules problems when start-up with jffs2 romfs images

[李海红]

Dear linux-mtd
            I am not sure do it have something to do with jffs2 problem,but no others to doult.
        here is my problems:
        kernel version 2.4.26,  nor flash type:S29GL128N10TF101
        when i erase the mtd partition,then i write the romfs bin file made with jffs2 format there.finish write,we reboot the board, when insmod one module, it can't insmod correctly, and after several times(mostly 2 or 3 times) reboot, it can insmod correctly,and after that, it will never show this insmod problem.my romfs is about 10MB,and the problem module is also big ,nearly 2MB.and this modules is not built in kernel.
       so i am doult if there is some problems with reading big file? 
       does anybody else encounter similar problems?
      
 and also there will show me information like:
CLEANMARKER node found at 0x00530000, not first node in block (0x00520000)
CLEANMARKER node found at 0x00550000, not first node in block (0x00540000)
CLEANMARKER node found at 0x00570000, not first node in block (0x00560000)
CLEANMARKER node found at 0x00590000, not first node in block (0x00580000)
CLEANMARKER node found at 0x005b0000, not first node in block (0x005a0000)
CLEANMARKER node found at 0x005d0000, not first node in block (0x005c0000)
CLEANMARKER node found at 0x005f0000, not first node in block (0x005e0000)
CLEANMARKER node found at 0x00610000, not first node in block (0x00600000)
CLEANMARKER node found at 0x00630000, not first node in block (0x00620000)
CLEANMARKER node found at 0x00650000, not first node in block (0x00640000)
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev

and this will cost many time when boot.
	

Best Regards!
　　　　　　
Li Haihong
Hardware Engineer
Ningbo CAS IC Design Center     
Fax： 86-574-87908484
Tel： 86-574-87910132
Web: www.nbicc.com
E-Mail：lhh at nbicc.com