jffs2 support for nand flash

[Tiju Jacob]

Hi All,

I have a freescale based development board i.MX27 ADS. I am trying to
boot from a
nand flash (Samsung) using redboot. It seems that redboot does not
have the nand driver but treats it as if it were nor with flat address
space. My queries are:

1. From where do I start to write the NAND drivers?
2. How would I enable the nand flash in redboot?
3. How to integrate jffs2 filesystem with redboot?
4. If integrated will I be able to write, read, erase files in the nand flash?
5. How could I enable the support for these functionalities?

Please also give me links to where I would be able to get more
information regarding this.

Thanks in advance.

TJ