[PATCH] [MTD] No debug message when debugging is disabled

[Jean Delvare]

Use pr_debug(...) instead of printk(KERN_DEBUG ...) so that the message
is only printed when debugging is enabled.

Signed-off-by: Jean Delvare <khali at linux-fr.org>
Tested-by: John stoffel <john at stoffel.org>
---
This patch was already sent on:
 * 2008-06-12

David, can you please add this patch to your tree? Thanks.

 drivers/mtd/chips/gen_probe.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- linux-2.6.26-rc5.orig/drivers/mtd/chips/gen_probe.c	2008-04-17 04:49:44.000000000 +0200
+++ linux-2.6.26-rc5/drivers/mtd/chips/gen_probe.c	2008-06-12 22:20:12.000000000 +0200
@@ -71,8 +71,8 @@ static struct cfi_private *genprobe_iden
 	   interleave and device type, etc. */
 	if (!genprobe_new_chip(map, cp, &cfi)) {
 		/* The probe didn't like it */
-		printk(KERN_DEBUG "%s: Found no %s device at location zero\n",
-		       cp->name, map->name);
+		pr_debug("%s: Found no %s device at location zero\n",
+			 cp->name, map->name);
 		return NULL;
 	}
 


-- 
Jean Delvare