[PATCH 1/1] [MTD/MAPS] Blackfin BF5xx Maps: Handle the case where flash memory and ethernet mac/phy are mapped onto the same async bank

Mike Frysinger vapier.adi at gmail.com
Wed Jan 30 09:14:30 EST 2008


On Jan 30, 2008 7:01 AM, Will Newton <will.newton at gmail.com> wrote:
> On Jan 30, 2008 10:02 AM, Bryan Wu <bryan.wu at analog.com> wrote:
>
> switch_to_flash is calling SSYNC():
>
> > +static void switch_to_flash(struct flash_save *save)
> > +{
> > +       local_irq_save(save->flags);
> > +
> > +       gpio_set_value(enet_flash_pin, 0);
> > +       SSYNC();
> > +
> > +       save->ambctl0 = bfin_read_EBIU_AMBCTL0();
> > +       save->ambctl1 = bfin_read_EBIU_AMBCTL1();
> > +       bfin_write_EBIU_AMBCTL0(BFIN_FLASH_AMBCTL0VAL);
> > +       bfin_write_EBIU_AMBCTL1(BFIN_FLASH_AMBCTL1VAL);
> > +       SSYNC();
> > +}
> > +
> > +static void switch_back(struct flash_save *save)
> > +{
> > +       bfin_write_EBIU_AMBCTL0(save->ambctl0);
> > +       bfin_write_EBIU_AMBCTL1(save->ambctl1);
> > +       SSYNC();
> > +
> > +       gpio_set_value(enet_flash_pin, 1);
> > +
> > +       local_irq_restore(save->flags);
> > +}
> > +
> > +static map_word bf5xx_read(struct map_info *map, unsigned long ofs)
> > +{
> > +       int nValue = 0x0;
> > +       map_word test;
> > +       struct flash_save save;
> > +
> > +       switch_to_flash(&save);
> > +       SSYNC();
>
> Is it necessary to SSYNC() here as well?
>
> > +       nValue = readw(map->virt + ofs);
> > +       SSYNC();
> > +       switch_back(&save);
> > +
> > +       test.x[0] = (u16)nValue;
> > +       return test;
> > +}
> > +
> > +static void bf5xx_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
> > +{
> > +       unsigned long i;
> > +       map_word test;
> > +
> > +       if ((unsigned long)to & 0x1) {
> > +               for (i = 0; i < len / 2 * 2; i += 2) {
> > +                       test = bf5xx_read(map, from + i);
> > +                       put_unaligned(test.x[0], (__le16 *)(to + i));
> > +               }
> > +       } else {
> > +               for (i = 0; i < len / 2 * 2; i += 2) {
> > +                       test = bf5xx_read(map, from + i);
> > +                       *((u16*)(to + i)) = test.x[0];
> > +               }
> > +       }
> > +
> > +       if (len & 0x1) {
> > +               test = bf5xx_read(map, from + i);
> > +               *((u8*)(to + i)) = (u8)test.x[0];
> > +       }
> > +}
> > +
> > +static void bf5xx_write(struct map_info *map, map_word d1, unsigned long ofs)
> > +{
> > +       u16 d;
> > +       struct flash_save save;
> > +
> > +       d = (u16)d1.x[0];
> > +
> > +       switch_to_flash(&save);
> > +
> > +       SSYNC();
>
> Also here?
>
> > +       writew(d, map->virt + ofs);
> > +       SSYNC();
> > +
> > +       switch_back(&save);
> > +}

thanks ... it should be fixed now
http://blackfin.uclinux.org/gf/project/linux-kernel/scmsvn/?action=browse&path=/&view=rev&root=linux-kernel&revision=4173
-mike



More information about the linux-mtd mailing list