[PATCH] Add Eon EN29SL800 flash

[Mike Rapoport]

This patch adds support for Eon EN29SL800 flashes

Signed-off-by: Mike Rapoport <mike at compulab.co.il>

 drivers/mtd/chips/jedec_probe.c |   58 ++++++++++++++++++++++++++++++++++++---
 1 files changed, 54 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 58e561e..7050e71 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -38,7 +38,7 @@
 #define MANUFACTURER_ST		0x0020
 #define MANUFACTURER_TOSHIBA	0x0098
 #define MANUFACTURER_WINBOND	0x00da
-
+#define CONTINUATION_CODE	0x007f

 /* AMD */
 #define AM29DL800BB	0x22C8
@@ -68,6 +68,10 @@
 #define AT49BV32X	0x00C8
 #define AT49BV32XT	0x00C9

+/* Eon */
+#define EN29SL800BB	0x226B
+#define EN29SL800BT	0x22EA
+
 /* Fujitsu */
 #define MBM29F040C	0x00A4
 #define MBM29LV650UE	0x22D7
@@ -632,6 +636,40 @@ static const struct amd_flash_info jedec_table[] = {
 			ERASEINFO(0x02000,8)
 		}
 	}, {
+		.mfr_id		= 0x1c,
+		.dev_id		= EN29SL800BT,
+		.name		= "Eon EN29SL800BT",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x10000, 15),
+			ERASEINFO(0x08000, 1),
+			ERASEINFO(0x02000, 2),
+			ERASEINFO(0x04000, 1),
+		}
+	}, {
+		.mfr_id		= 0x1c,
+		.dev_id		= EN29SL800BB,
+		.name		= "Eon EN29SL800BB",
+		.uaddr		= {
+			[0] = MTD_UADDR_0x0555_0x02AA,  /* x8 */
+			[1] = MTD_UADDR_0x0555_0x02AA,  /* x16 */
+		},
+		.DevSize	= SIZE_1MiB,
+		.CmdSet		= P_ID_AMD_STD,
+		.NumEraseRegions= 4,
+		.regions	= {
+			ERASEINFO(0x04000, 1),
+			ERASEINFO(0x02000, 2),
+			ERASEINFO(0x08000, 1),
+			ERASEINFO(0x10000, 15),
+		}
+	}, {
 		.mfr_id		= MANUFACTURER_FUJITSU,
 		.dev_id		= MBM29F040C,
 		.name		= "Fujitsu MBM29F040C",
@@ -1769,9 +1807,21 @@ static inline u32 jedec_read_mfr(struct map_info *map,
__u32 base,
 {
 	map_word result;
 	unsigned long mask;
-	u32 ofs = cfi_build_cmd_addr(0, cfi_interleave(cfi), cfi->device_type);
-	mask = (1 << (cfi->device_type * 8)) -1;
-	result = map_read(map, base + ofs);
+	int bank = 0;
+
+	/* According to JEDEC "Standard Manufacturer's Identification Code"
+	 * (http://www.jedec.org/download/search/jep106W.pdf)
+	 * several first banks can contain 0x7f instead of actual ID
+	 */
+	do {
+		u32 ofs = cfi_build_cmd_addr(0 + (bank << 8),
+					     cfi_interleave(cfi),
+					     cfi->device_type);
+		mask = (1 << (cfi->device_type * 8)) -1;
+		result = map_read(map, base + ofs);
+		bank++;
+	} while ((result.x[0] & mask) == CONTINUATION_CODE);
+
 	return result.x[0] & mask;
 }