[MTD] NAND: Add partition capability to nandsim
Adrian Hunter
ext-adrian.hunter at nokia.com
Mon Mar 19 06:46:43 EDT 2007
Enhance nandsim to be able to create more than 1 partition.
A new module parameter 'parts' may be used to specify partition
sizes.
Signed-off-by: Adrian Hunter <ext-adrian.hunter at nokia.com>
---
drivers/mtd/nand/nandsim.c | 97 +++++++++++++++++++++++++++++++++-----------
1 files changed, 73 insertions(+), 24 deletions(-)
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index c3bca95..638e6c2 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -37,6 +37,7 @@ #include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/delay.h>
+#include <linux/list.h>
/* Default simulator parameters values */
#if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE) || \
@@ -90,6 +91,8 @@ static uint bus_width = CONFIG_NAND
static uint do_delays = CONFIG_NANDSIM_DO_DELAYS;
static uint log = CONFIG_NANDSIM_LOG;
static uint dbg = CONFIG_NANDSIM_DBG;
+static unsigned long parts[MAX_MTD_DEVICES];
+static unsigned int parts_num;
module_param(first_id_byte, uint, 0400);
module_param(second_id_byte, uint, 0400);
@@ -104,6 +107,7 @@ module_param(bus_width, uint, 0400)
module_param(do_delays, uint, 0400);
module_param(log, uint, 0400);
module_param(dbg, uint, 0400);
+module_param_array(parts, ulong, &parts_num, 0400);
MODULE_PARM_DESC(first_id_byte, "The fist byte returned by NAND Flash 'read ID' command (manufaturer ID)");
MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID)");
@@ -118,6 +122,7 @@ MODULE_PARM_DESC(bus_width, "Chip's
MODULE_PARM_DESC(do_delays, "Simulate NAND delays using busy-waits if not zero");
MODULE_PARM_DESC(log, "Perform logging if not zero");
MODULE_PARM_DESC(dbg, "Output debug information if not zero");
+MODULE_PARM_DESC(parts, "Partition sizes (in erase blocks) separated by commas");
/* The largest possible page size */
#define NS_LARGEST_PAGE_SIZE 2048
@@ -131,9 +136,9 @@ #define NS_LOG(args...) \
#define NS_DBG(args...) \
do { if (dbg) printk(KERN_DEBUG NS_OUTPUT_PREFIX " debug: " args); } while(0)
#define NS_WARN(args...) \
- do { printk(KERN_WARNING NS_OUTPUT_PREFIX " warnig: " args); } while(0)
+ do { printk(KERN_WARNING NS_OUTPUT_PREFIX " warning: " args); } while(0)
#define NS_ERR(args...) \
- do { printk(KERN_ERR NS_OUTPUT_PREFIX " errorr: " args); } while(0)
+ do { printk(KERN_ERR NS_OUTPUT_PREFIX " error: " args); } while(0)
/* Busy-wait delay macros (microseconds, milliseconds) */
#define NS_UDELAY(us) \
@@ -238,7 +243,8 @@ union ns_mem {
* The structure which describes all the internal simulator data.
*/
struct nandsim {
- struct mtd_partition part;
+ struct mtd_partition partitions[MAX_MTD_DEVICES];
+ unsigned int nbparts;
uint busw; /* flash chip bus width (8 or 16) */
u_char ids[4]; /* chip's ID bytes */
@@ -381,6 +387,13 @@ static void free_device(struct nandsim *
}
}
+static char *get_partition_name(int i)
+{
+ char buf[64];
+ sprintf(buf, "NAND simulator partition %d", i);
+ return kstrdup(buf, GFP_KERNEL);
+}
+
/*
* Initialize the nandsim structure.
*
@@ -390,7 +403,9 @@ static int init_nandsim(struct mtd_info
{
struct nand_chip *chip = (struct nand_chip *)mtd->priv;
struct nandsim *ns = (struct nandsim *)(chip->priv);
- int i;
+ int i, ret = 0;
+ u_int32_t remains;
+ u_int32_t next_offset;
if (NS_IS_INITIALIZED(ns)) {
NS_ERR("init_nandsim: nandsim is already initialized\n");
@@ -448,6 +463,40 @@ static int init_nandsim(struct mtd_info
}
}
+ /* Fill the partition_info structure */
+ if (parts_num > ARRAY_SIZE(ns->partitions)) {
+ NS_ERR("too many partitions.\n");
+ ret = -EINVAL;
+ goto error;
+ }
+ remains = ns->geom.totsz;
+ next_offset = 0;
+ for (i = 0; i < parts_num; ++i) {
+ unsigned long part = parts[i];
+ if (!part || part > remains / ns->geom.secsz) {
+ NS_ERR("bad partition size.\n");
+ ret = -EINVAL;
+ goto error;
+ }
+ ns->partitions[i].name = get_partition_name(i);
+ ns->partitions[i].offset = next_offset;
+ ns->partitions[i].size = part * ns->geom.secsz;
+ next_offset += ns->partitions[i].size;
+ remains -= ns->partitions[i].size;
+ }
+ ns->nbparts = parts_num;
+ if (remains) {
+ if (parts_num + 1 > ARRAY_SIZE(ns->partitions)) {
+ NS_ERR("too many partitions.\n");
+ ret = -EINVAL;
+ goto error;
+ }
+ ns->partitions[i].name = get_partition_name(i);
+ ns->partitions[i].offset = next_offset;
+ ns->partitions[i].size = remains;
+ ns->nbparts += 1;
+ }
+
/* Detect how many ID bytes the NAND chip outputs */
for (i = 0; nand_flash_ids[i].name != NULL; i++) {
if (second_id_byte != nand_flash_ids[i].id)
@@ -474,7 +523,7 @@ static int init_nandsim(struct mtd_info
printk("sector address bytes: %u\n", ns->geom.secaddrbytes);
printk("options: %#x\n", ns->options);
- if (alloc_device(ns) != 0)
+ if ((ret = alloc_device(ns)) != 0)
goto error;
/* Allocate / initialize the internal buffer */
@@ -482,21 +531,17 @@ static int init_nandsim(struct mtd_info
if (!ns->buf.byte) {
NS_ERR("init_nandsim: unable to allocate %u bytes for the internal buffer\n",
ns->geom.pgszoob);
+ ret = -ENOMEM;
goto error;
}
memset(ns->buf.byte, 0xFF, ns->geom.pgszoob);
- /* Fill the partition_info structure */
- ns->part.name = "NAND simulator partition";
- ns->part.offset = 0;
- ns->part.size = ns->geom.totsz;
-
return 0;
error:
free_device(ns);
- return -ENOMEM;
+ return ret;
}
/*
@@ -1503,7 +1548,7 @@ static int __init ns_init_module(void)
{
struct nand_chip *chip;
struct nandsim *nand;
- int retval = -ENOMEM;
+ int retval = -ENOMEM, i;
if (bus_width != 8 && bus_width != 16) {
NS_ERR("wrong bus width (%d), use only 8 or 16\n", bus_width);
@@ -1564,21 +1609,23 @@ static int __init ns_init_module(void)
goto error;
}
- if ((retval = init_nandsim(nsmtd)) != 0) {
- NS_ERR("scan_bbt: can't initialize the nandsim structure\n");
- goto error;
- }
+ if ((retval = init_nandsim(nsmtd)) != 0)
+ goto err_exit;
- if ((retval = nand_default_bbt(nsmtd)) != 0) {
- free_nandsim(nand);
- goto error;
- }
+ if ((retval = nand_default_bbt(nsmtd)) != 0)
+ goto err_exit;
- /* Register NAND as one big partition */
- add_mtd_partitions(nsmtd, &nand->part, 1);
+ /* Register NAND partitions */
+ if ((retval = add_mtd_partitions(nsmtd, &nand->partitions[0], nand->nbparts)) != 0)
+ goto err_exit;
return 0;
+err_exit:
+ free_nandsim(nand);
+ nand_release(nsmtd);
+ for (i = 0;i < ARRAY_SIZE(nand->partitions); ++i)
+ kfree(nand->partitions[i].name);
error:
kfree(nsmtd);
@@ -1593,9 +1640,12 @@ module_init(ns_init_module);
static void __exit ns_cleanup_module(void)
{
struct nandsim *ns = (struct nandsim *)(((struct nand_chip *)nsmtd->priv)->priv);
+ int i;
free_nandsim(ns); /* Free nandsim private resources */
- nand_release(nsmtd); /* Unregisterd drived */
+ nand_release(nsmtd); /* Unregister driver */
+ for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i)
+ kfree(ns->partitions[i].name);
kfree(nsmtd); /* Free other structures */
}
@@ -1604,4 +1654,3 @@ module_exit(ns_cleanup_module);
MODULE_LICENSE ("GPL");
MODULE_AUTHOR ("Artem B. Bityuckiy");
MODULE_DESCRIPTION ("The NAND flash simulator");
-
--
1.4.3
More information about the linux-mtd
mailing list