[PATCH 4/4] MPC8313 enhanced Local Bus Controller NAND support.
Kumar Gala
galak at kernel.crashing.org
Fri Dec 14 00:14:25 EST 2007
Patch title should really be someting like FSL enhanced local bus (not
mpc8313).
On Dec 13, 2007, at 11:15 AM, Scott Wood wrote:
> Signed-off-by: Nick Spence <nick.spence at freescale.com>
> Signed-off-by: Scott Wood <scottwood at freescale.com>
> ---
> drivers/mtd/nand/Kconfig | 9 +
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/fsl_elbc_nand.c | 1281 +++++++++++++++++++++++++++++
> +++++++++
> 3 files changed, 1291 insertions(+), 0 deletions(-)
> create mode 100644 drivers/mtd/nand/fsl_elbc_nand.c
>
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index 246d451..05d976c 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -306,4 +306,13 @@ config MTD_ALAUDA
> These two (and possibly other) Alauda-based cardreaders for
> SmartMedia and xD allow raw flash access.
>
> +config MTD_NAND_FSL_ELBC
> + tristate "NAND support for Freescale eLBC controllers"
> + depends on MTD_NAND && PPC_OF
> + help
> + Various Freescale chips, including the 8313, include a NAND Flash
> + Controller Module with built-in hardware ECC capabilities.
> + Enabling this option will enable you to use this to control
> + external NAND devices.
> +
> endif # MTD_NAND
> diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
> index 3ad6c01..d0d4de2 100644
> --- a/drivers/mtd/nand/Makefile
> +++ b/drivers/mtd/nand/Makefile
> @@ -29,5 +29,6 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
> obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
> obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
> obj-$(CONFIG_MTD_ALAUDA) += alauda.o
> +obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
>
> nand-objs := nand_base.o nand_bbt.o
> diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/
> fsl_elbc_nand.c
> new file mode 100644
> index 0000000..ce8b0bf
> --- /dev/null
> +++ b/drivers/mtd/nand/fsl_elbc_nand.c
> @@ -0,0 +1,1281 @@
> +/* Freescale Enhanced Local Bus Controller NAND driver
> + *
> + * Copyright (c) 2006-2007 Freescale Semiconductor
> + *
> + * Authors: Nick Spence <nick.spence at freescale.com>,
> + * Scott Wood <scottwood at freescale.com>
> + *
> + * This program is free software; you can redistribute it and/or
> modify
> + * it under the terms of the GNU General Public License as
> published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
> 02111-1307 USA
> + */
> +
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/string.h>
> +#include <linux/ioport.h>
> +#include <linux/of_platform.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/nand.h>
> +#include <linux/mtd/nand_ecc.h>
> +#include <linux/mtd/partitions.h>
> +
> +#include <asm/io.h>
> +
> +
> +//#define ELBC_NAND_DEBUG_LVL 6
undef or something, not C++ comment.
>
> +
> +#ifdef ELBC_NAND_DEBUG_LVL
> +static int fcm_debug_level = ELBC_NAND_DEBUG_LVL;
> +#define FCM_DEBUG(n, args...) \
> + do { \
> + if (n <= fcm_debug_level) \
> + pr_dbg(args); \
> + } while(0)
> +#else
> +#define FCM_DEBUG(n, dev, args...) do { } while(0)
> +#endif
> +
> +#define MAX_BANKS 8
> +#define ERR_BYTE 0xFF /* Value returned for read bytes when read
> failed */
> +#define FCM_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait
> for FCM */
> +
> +struct elbc_bank {
> + u32 br; /**< Base Register */
> +#define BR_BA 0xFFFF8000
> +#define BR_BA_SHIFT 15
> +#define BR_PS 0x00001800
> +#define BR_PS_SHIFT 11
> +#define BR_PS_8 0x00000800 /* Port Size 8 bit */
> +#define BR_PS_16 0x00001000 /* Port Size 16 bit */
> +#define BR_PS_32 0x00001800 /* Port Size 32 bit */
> +#define BR_DECC 0x00000600
> +#define BR_DECC_SHIFT 9
> +#define BR_DECC_OFF 0x00000000 /* HW ECC checking and
> generation off */
> +#define BR_DECC_CHK 0x00000200 /* HW ECC checking on,
> generation off */
> +#define BR_DECC_CHK_GEN 0x00000400 /* HW ECC checking and
> generation on */
> +#define BR_WP 0x00000100
> +#define BR_WP_SHIFT 8
> +#define BR_MSEL 0x000000E0
> +#define BR_MSEL_SHIFT 5
> +#define BR_MS_GPCM 0x00000000 /* GPCM */
> +#define BR_MS_FCM 0x00000020 /* FCM */
> +#define BR_MS_SDRAM 0x00000060 /* SDRAM */
> +#define BR_MS_UPMA 0x00000080 /* UPMA */
> +#define BR_MS_UPMB 0x000000A0 /* UPMB */
> +#define BR_MS_UPMC 0x000000C0 /* UPMC */
> +#define BR_V 0x00000001
> +#define BR_V_SHIFT 0
> +#define BR_RES ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
> +
> + u32 or; /**< Base Register */
> +#define OR0 0x5004
> +#define OR1 0x500C
> +#define OR2 0x5014
> +#define OR3 0x501C
> +#define OR4 0x5024
> +#define OR5 0x502C
> +#define OR6 0x5034
> +#define OR7 0x503C
> +
> +#define OR_GPCM_AM 0xFFFF8000
> +#define OR_GPCM_AM_SHIFT 15
> +#define OR_GPCM_BCTLD 0x00001000
> +#define OR_GPCM_BCTLD_SHIFT 12
> +#define OR_GPCM_CSNT 0x00000800
> +#define OR_GPCM_CSNT_SHIFT 11
> +#define OR_GPCM_ACS 0x00000600
> +#define OR_GPCM_ACS_SHIFT 9
> +#define OR_GPCM_ACS_0b10 0x00000400
> +#define OR_GPCM_ACS_0b11 0x00000600
> +#define OR_GPCM_XACS 0x00000100
> +#define OR_GPCM_XACS_SHIFT 8
> +#define OR_GPCM_SCY 0x000000F0
> +#define OR_GPCM_SCY_SHIFT 4
> +#define OR_GPCM_SCY_1 0x00000010
> +#define OR_GPCM_SCY_2 0x00000020
> +#define OR_GPCM_SCY_3 0x00000030
> +#define OR_GPCM_SCY_4 0x00000040
> +#define OR_GPCM_SCY_5 0x00000050
> +#define OR_GPCM_SCY_6 0x00000060
> +#define OR_GPCM_SCY_7 0x00000070
> +#define OR_GPCM_SCY_8 0x00000080
> +#define OR_GPCM_SCY_9 0x00000090
> +#define OR_GPCM_SCY_10 0x000000a0
> +#define OR_GPCM_SCY_11 0x000000b0
> +#define OR_GPCM_SCY_12 0x000000c0
> +#define OR_GPCM_SCY_13 0x000000d0
> +#define OR_GPCM_SCY_14 0x000000e0
> +#define OR_GPCM_SCY_15 0x000000f0
> +#define OR_GPCM_SETA 0x00000008
> +#define OR_GPCM_SETA_SHIFT 3
> +#define OR_GPCM_TRLX 0x00000004
> +#define OR_GPCM_TRLX_SHIFT 2
> +#define OR_GPCM_EHTR 0x00000002
> +#define OR_GPCM_EHTR_SHIFT 1
> +#define OR_GPCM_EAD 0x00000001
> +#define OR_GPCM_EAD_SHIFT 0
> +
> +#define OR_UPM_AM 0xFFFF8000
> +#define OR_UPM_AM_SHIFT 15
> +#define OR_UPM_XAM 0x00006000
> +#define OR_UPM_XAM_SHIFT 13
> +#define OR_UPM_BCTLD 0x00001000
> +#define OR_UPM_BCTLD_SHIFT 12
> +#define OR_UPM_BI 0x00000100
> +#define OR_UPM_BI_SHIFT 8
> +#define OR_UPM_TRLX 0x00000004
> +#define OR_UPM_TRLX_SHIFT 2
> +#define OR_UPM_EHTR 0x00000002
> +#define OR_UPM_EHTR_SHIFT 1
> +#define OR_UPM_EAD 0x00000001
> +#define OR_UPM_EAD_SHIFT 0
> +
> +#define OR_SDRAM_AM 0xFFFF8000
> +#define OR_SDRAM_AM_SHIFT 15
> +#define OR_SDRAM_XAM 0x00006000
> +#define OR_SDRAM_XAM_SHIFT 13
> +#define OR_SDRAM_COLS 0x00001C00
> +#define OR_SDRAM_COLS_SHIFT 10
> +#define OR_SDRAM_ROWS 0x000001C0
> +#define OR_SDRAM_ROWS_SHIFT 6
> +#define OR_SDRAM_PMSEL 0x00000020
> +#define OR_SDRAM_PMSEL_SHIFT 5
> +#define OR_SDRAM_EAD 0x00000001
> +#define OR_SDRAM_EAD_SHIFT 0
remove all OR_GPCM_*, OR_UPM_*, OR_SDRAM_* not used anywhere
[snip]
>
> +struct elbc_regs {
> + struct elbc_bank bank[8];
> + u8 res0[0x28];
> + u32 mar; /**< UPM Address Register */
> + u8 res1[0x4];
> + u32 mamr; /**< UPMA Mode Register */
> + u32 mbmr; /**< UPMB Mode Register */
> + u32 mcmr; /**< UPMC Mode Register */
> + u8 res2[0x8];
> + u32 mrtpr; /**< Memory Refresh Timer Prescaler
> Register */
> + u32 mdr; /**< UPM Data Register */
> + u8 res3[0x4];
> + u32 lsor; /**< Special Operation Initiation Register
> */
> + u32 lsdmr; /**< SDRAM Mode Register */
> + u8 res4[0x8];
> + u32 lurt; /**< UPM Refresh Timer */
> + u32 lsrt; /**< SDRAM Refresh Timer */
> + u8 res5[0x8];
> + u32 ltesr; /**< Transfer Error Status Register */
> +#define LTESR_BM 0x80000000
> +#define LTESR_FCT 0x40000000
> +#define LTESR_PAR 0x20000000
> +#define LTESR_WP 0x04000000
> +#define LTESR_ATMW 0x00800000
> +#define LTESR_ATMR 0x00400000
> +#define LTESR_CS 0x00080000
> +#define LTESR_CC 0x00000001
> +#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
> + u32 ltedr; /**< Transfer Error Disable Register */
> + u32 lteir; /**< Transfer Error Interrupt Register */
> + u32 lteatr; /**< Transfer Error Attributes Register */
> + u32 ltear; /**< Transfer Error Address Register */
> + u8 res6[0xC];
> + u32 lbcr; /**< Configuration Register */
> +#define LBCR_LDIS 0x80000000
> +#define LBCR_LDIS_SHIFT 31
> +#define LBCR_BCTLC 0x00C00000
> +#define LBCR_BCTLC_SHIFT 22
> +#define LBCR_AHD 0x00200000
> +#define LBCR_LPBSE 0x00020000
> +#define LBCR_LPBSE_SHIFT 17
> +#define LBCR_EPAR 0x00010000
> +#define LBCR_EPAR_SHIFT 16
> +#define LBCR_BMT 0x0000FF00
> +#define LBCR_BMT_SHIFT 8
> +#define LBCR_INIT 0x00040000
> + u32 lcrr; /**< Clock Ratio Register */
> +#define LCRR_DBYP 0x80000000
> +#define LCRR_DBYP_SHIFT 31
> +#define LCRR_BUFCMDC 0x30000000
> +#define LCRR_BUFCMDC_SHIFT 28
> +#define LCRR_ECL 0x03000000
> +#define LCRR_ECL_SHIFT 24
> +#define LCRR_EADC 0x00030000
> +#define LCRR_EADC_SHIFT 16
> +#define LCRR_CLKDIV 0x0000000F
> +#define LCRR_CLKDIV_SHIFT 0
> + u8 res7[0x8];
> + u32 fmr; /**< Flash Mode Register */
> +#define FMR_CWTO 0x0000F000
> +#define FMR_CWTO_SHIFT 12
> +#define FMR_BOOT 0x00000800
> +#define FMR_ECCM 0x00000100
> +#define FMR_AL 0x00000030
> +#define FMR_AL_SHIFT 4
> +#define FMR_OP 0x00000003
> +#define FMR_OP_SHIFT 0
> + u32 fir; /**< Flash Instruction Register */
> +#define FIR_OP0 0xF0000000
> +#define FIR_OP0_SHIFT 28
> +#define FIR_OP1 0x0F000000
> +#define FIR_OP1_SHIFT 24
> +#define FIR_OP2 0x00F00000
> +#define FIR_OP2_SHIFT 20
> +#define FIR_OP3 0x000F0000
> +#define FIR_OP3_SHIFT 16
> +#define FIR_OP4 0x0000F000
> +#define FIR_OP4_SHIFT 12
> +#define FIR_OP5 0x00000F00
> +#define FIR_OP5_SHIFT 8
> +#define FIR_OP6 0x000000F0
> +#define FIR_OP6_SHIFT 4
> +#define FIR_OP7 0x0000000F
> +#define FIR_OP7_SHIFT 0
> +#define FIR_OP_NOP 0x0 /* No operation and end of sequence */
> +#define FIR_OP_CA 0x1 /* Issue current column address */
> +#define FIR_OP_PA 0x2 /* Issue current block+page address
> */
> +#define FIR_OP_UA 0x3 /* Issue user defined address */
> +#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */
> +#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */
> +#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */
> +#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */
> +#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer
> */
> +#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */
> +#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */
> +#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */
> +#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */
> +#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */
> +#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */
> +#define FIR_OP_RSW 0xE /* Wait then read 1 or 2 bytes */
> + u32 fcr; /**< Flash Command Register */
> +#define FCR_CMD0 0xFF000000
> +#define FCR_CMD0_SHIFT 24
> +#define FCR_CMD1 0x00FF0000
> +#define FCR_CMD1_SHIFT 16
> +#define FCR_CMD2 0x0000FF00
> +#define FCR_CMD2_SHIFT 8
> +#define FCR_CMD3 0x000000FF
> +#define FCR_CMD3_SHIFT 0
> + u32 fbar; /**< Flash Block Address Register */
> +#define FBAR_BLK 0x00FFFFFF
> + u32 fpar; /**< Flash Page Address Register */
> +#define FPAR_SP_PI 0x00007C00
> +#define FPAR_SP_PI_SHIFT 10
> +#define FPAR_SP_MS 0x00000200
> +#define FPAR_SP_CI 0x000001FF
> +#define FPAR_SP_CI_SHIFT 0
> +#define FPAR_LP_PI 0x0003F000
> +#define FPAR_LP_PI_SHIFT 12
> +#define FPAR_LP_MS 0x00000800
> +#define FPAR_LP_CI 0x000007FF
> +#define FPAR_LP_CI_SHIFT 0
> + u32 fbcr; /**< Flash Byte Count Register */
> +#define FBCR_BC 0x00000FFF
> + u8 res11[0x8];
> + u8 res8[0xF00];
we really should use __be32
- k
More information about the linux-mtd
mailing list