transfer jffs2 rootFS to Nand flash

[Ricard Wanderlof]

On Thu, 30 Aug 2007, Saravanan Chanemouganandam wrote:

> I have unconfigured the compulab NAND flash block driver which reinitialise
> (erases on reboot) each and everytime of reboot that conflicts with MTD nand
> driver.

That would definitely explain the symptoms you were seeing (no jffs2 nodes 
found when mounting the rootfs).

>
> This fixed my problem and I can be able to successfully mount the jffs2
> rootfs.
>
> IP-Config: Complete:
>      device=eth0, addr=192.168.6.202, mask=255.255.255.0, gw=192.168.6.1,
>     host=cm-x270, domain=, nis-domain=(none),
>     bootserver=192.168.6.1, rootserver=192.168.6.1, rootpath=
> VFS: Mounted root (jffs2 filesystem).
> Freeing init memory: 120K
> INIT: version 2.86 booting
>
> Thanks a lot for your comments and your valuable time.

Great!

/Ricard
--
Ricard Wolf Wanderlöf                           ricardw(at)axis.com
Axis Communications AB, Lund, Sweden            www.axis.com
Phone +46 46 272 2016                           Fax +46 46 13 61 30