MTD nand driver help

[Ricard Wanderlof]

On Thu, 23 Aug 2007, Tushar Kapse wrote:

> thanx for your valuable suggestion..
> Here are the steps followed to create JFFS2 and dumped into the NAND 
> using Boot Loader utility for NAND:
> ...
> Once we have followed above steps,and when i Boot the Linux we found
> the error as follows:
> "Kernel panic - not syncing: VFS: Unable to mount root fs on
> unknown-block(31,0)"

Have you tried specifying the file system type of the root file system on 
the kernel command line (i.e.  rootfstype=jffs2 ) ? Depending on the file 
system support configured in the kernel, it may not necessarily 
auto-detect a jffs2 file system.

/Ricard
--
Ricard Wolf Wanderlöf                           ricardw(at)axis.com
Axis Communications AB, Lund, Sweden            www.axis.com
Phone +46 46 272 2016                           Fax +46 46 13 61 30