patch to leave cfi in read-array on suspend(reposted)

[Artem Bityutskiy]

On Thu, 2006-10-19 at 10:21 -0400, Nicolas Pitre wrote:
> > during some testing with several samsung s3c24xx based
> > devices it was discovered that often the
> > cfi_cmdset_0001.c would not leave the chip in
> > read-array mode on suspend. this is an issue if the
> > same flash chip is used for the bootloader that needs
> > to be read on resume. attached is a patch generated
> > against the 2.6.18 kernel and has been tested with
> > several s3c24xx based devices as well as several sharp
> > lh79520 devices. your feedback would be appreciated.
> > 
> > Signed-off-by: David Anders <danders at amltd.com>
> 
> Signed-off-by: Nicolas Pitre <nico at cam.org>

Thanks,

will add it to my git tree and take care about its destiny.

-- 
Best regards,
Artem Bityutskiy (Битюцкий Артём)