patch to leave cfi in read-array on suspend(reposted)

[David Anders]

greetings,

during some testing with several samsung s3c24xx based
devices it was discovered that often the
cfi_cmdset_0001.c would not leave the chip in
read-array mode on suspend. this is an issue if the
same flash chip is used for the bootloader that needs
to be read on resume. attached is a patch generated
against the 2.6.18 kernel and has been tested with
several s3c24xx based devices as well as several sharp
lh79520 devices. your feedback would be appreciated.

Signed-off-by: David Anders <danders at amltd.com>

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cfi_cmdset_0001.patch
Type: application/octet-stream
Size: 524 bytes
Desc: 3238585821-cfi_cmdset_0001.patch
Url : http://lists.infradead.org/pipermail/linux-mtd/attachments/20061019/413fbe18/attachment.obj