JFFS2 + NAND solution

[Selmeci, Tamas]

Hello!

Now I have the solution for JFFS2 problem.

If you remember my previous message written yesterday, I could successfully mount the JFFS2 partition.

If you want to use it as rootfs, then the following kernel parameters must be given:

    root=/dev/mtdblock4 rootfstype=jffs2

That's it. I hope this little bit of information will help others.

Bye
--
Tamas Selmeci
Siemens PSE HU
Tel.   : +36-1-471-3861
Email  : tamas.selmeci at siemens.com
Address: H-1143 Budapest, Gizella ut 51-59