[PATCH] AT91RM9200 NAND support

[Thomas Gleixner]

On Tue, 2006-06-20 at 11:07 +0200, Savin Zlobec wrote:
> I've put the kernel with latest mtd on my board and got the following:
> 
> Nand is recognized as 'NAND device: Manufacturer ID: 0x98, Chip ID: 0x75 
> (Toshiba NAND 32MiB 3,3V 8-bit)',
> should be 'NAND device: Manufacturer ID: 0xec, Chip ID: 0x75 (Samsung 
> NAND 32MiB 3,3V 8-bit)'.
> 
> No bad blocks are detected at initial nand scan, but when running 
> flash_eraseall all blocks are found bad.

Hmm. The interface has not changed, AFAICT. What version of
flash_eraseall are you using and which commandline options ?

Can you verify with the latest mtd-utils from 

http://git.infradead.org/?p=mtd-utils.git;a=summary

Thanks,

	tglx