Support for command set 0003 not present

Christian Oelschlegel c.oelschlegel at web.de
Sun Jul 16 06:46:24 EDT 2006


Hi together,

I have tried to find the solution in old Threads, but there wasn't sometimes 
the question but never the Answer.

The pcmciamtd module will be loaded but then the kernel log shows me the 
following:

Jul 16 11:55:14 localhost kernel: [17184337.632000] pccard: PCMCIA card 
inserted into slot 0
Jul 16 11:55:14 localhost kernel: [17184337.632000] cs: memory probe 
0xa0000000-0xa0ffffff: clean.
Jul 16 11:55:14 localhost kernel: [17184337.636000] pcmcia: registering new 
device pcmcia0.0
Jul 16 11:55:15 localhost kernel: [17184338.280000] pcmciamtd: PCMCIA Flash 
memory card driver $Revision: 1.55 $
Jul 16 11:55:15 localhost kernel: [17184338.312000] Found: Intel I28F016S3
Jul 16 11:55:15 localhost kernel: [17184338.312000] intel VALUE SERIES 100  04  
COPYRIGHT INTEL CORPORATION 1995: Found 2 x8 devices at 0x0 in 16-bit bank
Jul 16 11:55:15 localhost kernel: [17184338.392000] Support for command set 
0003 not present
Jul 16 11:55:15 localhost kernel: [17184338.392000] gen_probe: No supported 
Vendor Command Set found
Jul 16 11:55:15 localhost kernel: [17184338.420000] CFI: Found no intel VALUE 
SERIES 100  04  COPYRIGHT INTEL CORPORATION 1995 device at location zero

What is wrong here.

I'm just using mtd the first time here so try to explain a little bit more.

Thank you to all who want to help me.

Oelison.




More information about the linux-mtd mailing list