linux-2.6.19-g620034c8 build #163 failed

[Josh Boyer]

On Thu, 2006-12-07 at 11:41 +0100, Toralf Förster wrote:
> Hello,

> Here's the config:

> # RAM/ROM/Flash chip drivers
> #
> # CONFIG_MTD_CFI is not set
> CONFIG_MTD_JEDECPROBE=y
> CONFIG_MTD_GEN_PROBE=m
> # CONFIG_MTD_CFI_ADV_OPTIONS is not set
> CONFIG_MTD_MAP_BANK_WIDTH_1=y
> CONFIG_MTD_MAP_BANK_WIDTH_2=y
> CONFIG_MTD_MAP_BANK_WIDTH_4=y
> # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> CONFIG_MTD_CFI_I1=y
> CONFIG_MTD_CFI_I2=y
> # CONFIG_MTD_CFI_I4 is not set
> # CONFIG_MTD_CFI_I8 is not set
> # CONFIG_MTD_CFI_INTELEXT is not set
> CONFIG_MTD_CFI_AMDSTD=y

You have genprobe as a module (as well as core MTD), but AMDSTD compiled
in.  That seems very odd.  Try setting CONFIG_MTD_CFI_AMDSTD=m

josh