nand write problem

Tue May 31 11:35:03 EDT 2005

Uuups, wrong shortcut ;-)

>> What version of nandwrite (nandwrite -V) do you have? Version 1.30
>> supports -f.
I used version 1.30. Peter Grayson just sent a patch.

>>> then I mount it with
>>> # mount -t jffs2 /dev/mtdblock/2 /mnt/
>>> and get a lot of
>>> CLEANMARKER node found at 0x00000000 has totlen 0xc != normal 0x0
>>>
>>> Copy the image with nandwrite is the correct and only way? Or is 
>>> there another possibility?
>>
>>
>> I've seen the CLEANMARKER errors before. How did you create the JFFS2
>> partition?
I used flash_eraseall -j /dev/mtd/2 and then I copied it with the 
command above.

>> Check out this thread for a little more detail:
>> http://lists.infradead.org/pipermail/linux-mtd/2005-March/012045.html
Thanks.

Regards,
Jonas