two questions about jffs2

[Artem B. Bityuckiy]

On Tue, 2005-05-03 at 17:15 -0700, Vahid Fereydunkolahi wrote:
> Hi,
>  How does jffs2 handle the bad blocks on the NAND
> flash? ( I noticed that at initialization jffs2 scans
> the devivce and creates a bad block list, but it never
> uses the bad block list. It seems that if the block is
> bad it is not put into the block list).
JFFS2 handles bad blocks just fine. Some info may be found at the MTD
web site. Visit it please.

> Does current jffs2 and mtd support the NAND devices
> with Page size more than 528 bytes?
Yes, it does.

-- 
Best Regards,
Artem B. Bityuckiy,
St.-Petersburg, Russia.