kernel messages from INFTL

[Andre]

First of all, thank you Thomas for your help on trying to get my
diskonchip2000 to be recognized by linuxmtd.

After enabling the right config flags in the kernel, I can now mount my
diskonchip2000.

There were some messages during the initial loading of the inftl module that
frightened me a bit. Here is the entire output from dmesg:
==================
DiskOnChip found at 0xd0000
Detected 3 chips per floor.
NAND device: Manufacturer ID: 0xec, Chip ID: 0x79 (Samsung NAND 128MiB 3,3V
8-bit)
3 NAND chips detected
Bad block table not found for chip 0
Bad block table not found for chip 0
Found DiskOnChip BNAND Media Header at 0x4000
    bootRecordID          = BNAND
    NoOfBootImageBlocks   = 0
    NoOfBinaryPartitions  = 1
    NoOfBDTLPartitions    = 1
    BlockMultiplerBits    = 0
    FormatFlgs            = 1
    OsakVersion           = 5.1.4.0
    PercentUsed           = 98
    PARTITION[0] ->
        virtualUnits    = 4
        firstUnit       = 2
        lastUnit        = 5
        flags           = 0x20000000
        spareUnits      = 0
    PARTITION[1] ->
        virtualUnits    = 24072
        firstUnit       = 11
        lastUnit        = 24575
        flags           = 0xc0000000
        spareUnits      = 2
Creating 2 MTD partitions on "DiskOnChip 2000 (INFTL Model)":
0x00008000-0x00018000 : " DiskOnChip BDK partition"
0x0002c000-0x18000000 : " DiskOnChip BDTL partition"

<Andre> looks ok up until here

INFTL: inftlcore.c $Revision: 1.18 $, inftlmount.c $Revision: 1.16 $
INFTL: corrupt block 10588 in chain 10588, chain length 0, erase mark 0x0?
INFTL: formatting chain at block 10588
INFTL: formatting block 10588
INFTL: error while formatting block 10588
INFTL: corrupt block 15274 in chain 15274, chain length 0, erase mark 0x0?
INFTL: formatting chain at block 15274
INFTL: formatting block 15274
INFTL: error while formatting block 15274
INFTL: corrupt block 21286 in chain 21286, chain length 0, erase mark 0x0?
INFTL: formatting chain at block 21286
INFTL: formatting block 21286
INFTL: error while formatting block 21286
INFTL: corrupt block 24574 in chain 24574, chain length 0, erase mark
0xffff?
INFTL: formatting chain at block 24574
INFTL: formatting block 24574
INFTL: corrupt block 24575 in chain 24575, chain length 0, erase mark
0xffff?
INFTL: formatting chain at block 24575
INFTL: formatting block 24575
 inftla: inftla1
==================
The INFTL messages do not appear on subsequent loads of the inftl module.
Can somebody please explain what happened, i.e. should I be concerned?

/proc/mtd:
mtd0: 18000000 00004000 "DiskOnChip 2000 (INFTL Model)"
mtd1: 00010000 00004000 " DiskOnChip BDK partition"
mtd2: 17fd4000 00004000 " DiskOnChip BDTL partition"

cheers,
Andre