RedBoot FIS Directory parsing bails out early

Russ Dill russ.dill at gmail.com
Tue Aug 23 20:50:26 EDT 2005


> > Deleted partitions cause the FIS directory parsing to bail out early,
> > this is because in redboot, deleting a partition causes the first byte
> > in the entry to be set to 0xff. The kernel is currently looking for
> > 0xff as an end of table marker.
> >
> > This means that if you create two partitions, ie, test1 and test2, and
> > then delete test1, the kernel will no longer detect test1.
> >
> > redboot.c should instead scan every entry in the FIS table, and throw
> > out any entries that begin with 0xff, ie, change the break to a
> > continue. The checksum check should also be changed  from a break to a
> > continue (even though checksums in fis tables were never implemented
> > anyway).
> >
> > pseudo patch:
> >
> >  struct fis_list *new_fl, **prev
> >
> >  if (buf[i].name[0] == 0xff)
> > -       break;
> > +       continue;
> >  if (!redboot_checksum(&buf[i]))
> > -       break;
> > +       continue;
> >
> 
> Care to provide a real patch ?
> 


Actually, looking at some linux boards out there, because the space
allocated to the partition table is so large (usually around 120k),
the extra space is often used for board specific stuff. It'd probably
be good to add in a:

if (buf[i].name[0] == 0xff && buf[i].name[1] == 0xff)
        break;

Sorry though, I can't generate a real patch at the moment.




More information about the linux-mtd mailing list