Ricoh SD card reader

[Herman Sheremetyev]

Hi All,

I'm hoping I'm on the right list with this question, if not please
accept my apologies and if possible direct me to the right place. I own
an Asus M6N series notebook that has a built-in SD card reader that I'm
trying to get working.  I'm running Fedora Core 2 with a vanilla 2.6.7
kernel and pcmcia-cs-3.2.7.  Reading through the pcmcia-cs docs it seems
that my chip is supported my the memory-cs module however all memory
support is removed from the RPM with a comment saying that it's obsolete
and should be handled by MTD drivers in the kernel.  The pcmcia-cs docs
also state that I can't use the standalone drivers with a 2.6 kernel so
I'm out of luck testing that module.  I read through the available
documentation on MTD that comes with the kernel and tried loading the
various mtd modules but nothing seems to work.  Here's some information
about the device:

[/sbin/lspci -vv]
02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
        Subsystem: Asustek Computer, Inc.: Unknown device 1864
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at 20002000 (32-bit, non-prefetchable)
        Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
        Memory window 0: 20c00000-20fff000 (prefetchable)
        Memory window 1: 21000000-213ff000
        I/O window 0: 00004800-000048ff
        I/O window 1: 00004c00-00004cff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
PostWrite+
        16-bit legacy interface ports at 0001

[/var/log/messages when plugging in an SD card]
Jun 26 15:56:24 camel kernel: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xcbfff 0xe0000-0xfffff
Jun 26 15:56:24 camel cardmgr[1003]: unsupported card in socket 0
Jun 26 15:56:24 camel cardmgr[1003]:   product info: "RICOH",
"Bay1Controller"
Jun 26 15:56:24 camel cardmgr[1003]:   function: 254 ((null))


[/var/log/messages after /sbin/modprobe ftl]
Jun 26 17:01:47 camel kernel: $Id: ftl.c,v 1.51 2003/06/23 12:00:08
dwmw2 Exp $
Jun 26 17:01:47 camel kernel: ram_read(pos:0, len:68)
Jun 26 17:01:47 camel kernel: ram_read(pos:131072, len:68)
Jun 26 17:01:47 camel kernel: ram_read(pos:262144, len:68)
Jun 26 17:01:47 camel kernel: ram_read(pos:393216, len:68)
Jun 26 17:01:47 camel kernel: ram_read(pos:524288, len:68)
Jun 26 17:01:47 camel kernel: ram_read(pos:655360, len:68)
Jun 26 17:01:47 camel kernel: ram_read(pos:786432, len:68)
Jun 26 17:01:47 camel kernel: ram_read(pos:917504, len:68)
Jun 26 17:01:47 camel kernel: ftl_cs: FTL header not found.

None of the other MTD modules produce interesting output.  Any
assistance would be much appreciated.

TIA,

-Herman