Unable to mount rootfs on mtdblock3
Trilok Soni
x000soni at india.ti.com
Fri Feb 27 00:21:39 EST 2004
Gary,
Well, kernel is able to mount jffs2 on board. Here again, I have used "cat"
command only.
But curious to know if there is any logical difference you might have
noticed...
Regards,
Trilok Soni
----- Original Message -----
From: <ghannon at cspi.com>
To: "Trilok Soni" <x000soni at india.ti.com>
Sent: Thursday, February 26, 2004 10:28 PM
Subject: Re: Unable to mount rootfs on mtdblock3
>
>
>
>
>
>
> > 2.3 cat filesystem.jffs2 > /dev/mtd3
>
> > 2.4 mount -t jffs2 /dev/mtdblock3 /mnt/jffs2
> > It successfully mounts the filesystem...
> > 2.5 umount /mnt/jffs2
>
> >Any Suggestions?
>
> I'm not sure if cat'ing the file to the device
> produces what you want. Did you examine it after you
> mounted it? I would have probably tried dd.
>
> If this makes a difference, you can post it back to the
> list as the solution you found. I'm just
> taking a guess.
>
>
> Gary
>
>
>
>
>
More information about the linux-mtd
mailing list