problems with "JFFS2 write speed"

[Gareth Bult (Encryptec)]

Hi,

Urm, no I wanted compression ... but a 2.4G celeron should be able to do
> 29k/sec !

Using priority ..

Q: I have an erasesize of 128k (and consequently a sector size of 128k)
because the memory in question is 256Mb.
(JFFS2 modifies sizes to fit within a malloc [fs.c])

Could this be the problem ?

tia
Gareth.

On Thu, 2004-12-09 at 16:29 +0300, Artem B. Bityuckiy wrote: 
> Did you try disable compression? Which compression mode do you use 
> (size, priority) ?
> 
> Gareth Bult (Encryptec) wrote:
> > Hi,
> > 
> > I'm using JFFS2 on a USB key. (using mtdblock)
> > 
> > Works well, read speed is blinding ..
> > 
> > If I use ext2, the write speed is measured in Mb/sec ..
> > Using jffs2 it's 29k / sec ..
> > 
> > Running Linux 2.6.9 ..
> > 
> > Anyone got any ideas re; speedups ?
> > 
> > tia
> > Gareth.
> > 
> > 
> > 
> > ______________________________________________________
> > Linux MTD discussion mailing list
> > http://lists.infradead.org/mailman/listinfo/linux-mtd/
> > 
>