jffs2 error with gcc 3.3.2

[Jaap-Jan Boor]

I used once jffs2 over blkmtd on compact flash (ide)  
on a powerpc system, all built with gcc 3.3.2 (and linux 2.4.25) 
and had no problems beside that mounting was very slow.

regards,

Jaap-Jan

On Tue, 2004-04-27 at 16:19, Tino Keitel wrote:
> Hi folks,                                            
>                                                      
> I build a kernel 2.4.25 for ARM XScale using the MTD CVS version from
> last week with a plain gcc 3.3.2 and binutils 2.14. When the kernel
> mounts the root-FS, I get this message:
>    
> VFS: Mounted root (jffs2 filesystem).                     
> Mounted devfs on /dev                
> Freeing init memory: 68K  
> jffs2_get_inode_nodes(): CRC failed on node at 0x00d063a8: Read
> 0x648da27a, calculated 0xaad091fe                    
> jffs2_do_read_inode(): No data nodes found for ino #513                       
> jffs2_get_inode_nodes(): Data CRC failed on node at 0x00d7aea4: Read   
> 0xc9706472, calculated 0xfb804e0f                    
> jffs2_do_read_inode(): No data nodes found for ino #451                       
> Kernel panic: No init found.  Try passing init= option to kernel.
>                                                                  
> After a reboot, the filesystem is completly trashed:
> 
> VFS: Mounted root (jffs2 filesystem).
> Mounted devfs on /dev                                            
> Freeing init memory: 68K                                         
> jffs2_do_read_inode() on nonexistent ino 513
> jffs2_do_read_inode() on nonexistent ino 451                     
> Kernel panic: No init found.  Try passing init= option to kernel.
> 
> The filesystem worked before this with a kernel wich was built with gcc
> 2.95.3. Are there any known issues regarding jffs2 and gcc 3.x?
> 
> Regards,
> Tino
>    
-- 
J.G.J. Boor                       Anton Philipsweg 1
Software Engineer                 1223 KZ Hilversum
AimSys bv                         tel. +31 35 689 1941
Postbus 2194, 1200 CD Hilversum   mailto:jjboor at aimsys.nl