Bootloader for NAND flash with ecc and/or bad block checking

[Charles Manning]

You can get a tarball at http://www.aleph1.co.uk/cgi-bin/viewcvs.cgi/
-- CHarles


On Friday 16 April 2004 18:48, Shen Aaron-r62966 wrote:
> Hi Charles,
>
>   Thank you very much, your response is very very helpful to me.
>
>   But actually, I don't know how to setup the environment to get the codes
> by CVS althought I do know how to use CVS in linux system. Can you tell me
> the steps, or, if the code is not too large, can you just zip it and then
> send it to me?
>
>   Thank you again!
>
> Best Regards!
> Feng Shen (Aaron)
> Motorola Suzhou Technology Center (SPS)
> Tel: 0512-68091888-6620       Fax: 68249812
>
> > -----Original Message-----
> > From: Charles Manning [mailto:manningc2 at actrix.gen.nz]
> > Sent: 2004?4?16? 6:31
> > To: Shen Aaron-r62966; linux-mtd at lists.infradead.org
> > Subject: Re: Bootloader for NAND flash with ecc and/or bad
> > block checking
> >
> > On Wednesday 14 April 2004 15:41, Shen Aaron-r62966 wrote:
> > > Hi,
> > >
> > >   Anyone has the experience of NAND flash bootloader?
> > >   Could you send me a bootloader with ecc and/or bad block
> >
> > checking inside?
> >
> > > I'd like to take it as a reference.
> >
> > You could look at the YAFFS bootloader in YAFFS CVS and start
> > with that as a
> > kick-off.
> >
> > -- CHarles