[PATCH] extend physmap.c to support run-time adding partitions
Jun Sun
jsun at mvista.com
Thu Oct 23 19:57:26 EDT 2003
On Thu, Oct 23, 2003 at 01:04:06PM -0700, Jun Sun wrote:
> On Thu, Oct 23, 2003 at 08:15:41PM +0200, Jörn Engel wrote:
> > On Thu, 23 October 2003 10:43:20 -0700, Jun Sun wrote:
> > > >
> > > > o All those translate to improvements in the source code. How about the
> > > > binary? Compile with and without patch and post the kernel image
> > > > size. And remember that noone will use two map files at the same time
> > > > in the real world.
> > > >
> > > > o Copy and paste is simple. So simple in fact, that everyone does it,
> > > > as you have observed. Why make it more complicated, unless you have
> > > > clear advantages.
> > >
> > > ... as if my previous listings are not advantages. :)
> >
> > They are, no doubt. But there are disadvantages as well.
> >
> > > > Yes, I like the basic idea, tried to do it myself. But what's the use
> > > > if all your users care about binary size and that increases?
> > >
> > > I find it hard to belive this patch would increase kernel size.
> > > Can someone using existing propriatary mapping driver apply this
> > > patch, switch to use physmap.c, and let us know the size increase?
> > >
> > > How much increase would you start to really care in a typical .5M to 2M
> > > kernel? 1K or 10K or 100K? I think the increase should be minimum if any.
> >
> > I don't know and I don't care. You want the patch in, you show the
> > numbers or convince David otherwise.
> >
>
> I will do some numbers,
<snip>
OK, I converted jmr3927 flash driver to use physmap and kernel size increases
by whopping 96 bytes! See the ELF header dump below. :)
Meanwhile, we sadly announce the loss of drivers/mtd/maps/jmr3927-flash.c
file and the death of CONFIG_MTD_JMR3927 (not in MTD tree yet). :0
Jun
-------------------------------------------
original vmlinux with no modification:
vmlinux.orig: file format elf32-tradlittlemips
Sections:
Idx Name Size VMA LMA File off Algn
0 .text 001aa080 80050000 80050000 00001000 2**5
CONTENTS, ALLOC, LOAD, READONLY, CODE
1 .fixup 00001250 801fa080 801fa080 001ab080 2**0
CONTENTS, ALLOC, LOAD, READONLY, CODE
2 .kstrtab 00005000 801fb2d0 801fb2d0 001ac2d0 2**2
CONTENTS, ALLOC, LOAD, READONLY, DATA
3 __ex_table 000016d8 802002d0 802002d0 001b12d0 2**2
CONTENTS, ALLOC, LOAD, READONLY, DATA
4 __dbe_table 00000000 802019a8 802019a8 001b29a8 2**0
CONTENTS, ALLOC, LOAD, READONLY, DATA
5 __ksymtab 000025a8 802019a8 802019a8 001b29a8 2**2
CONTENTS, ALLOC, LOAD, READONLY, DATA
6 .data.init_task 00002000 80204000 80204000 001b5000 2**3
CONTENTS, ALLOC, LOAD, DATA
7 .text.init 0001757c 80206000 80206000 001b7000 2**2
CONTENTS, ALLOC, LOAD, READONLY, CODE
8 .data.init 00005070 8021d57c 8021d57c 001ce57c 2**2
CONTENTS, ALLOC, LOAD, DATA
9 .setup.init 000000e8 802225f0 802225f0 001d35f0 2**2
CONTENTS, ALLOC, LOAD, DATA
10 .initcall.init 000000ac 802226d8 802226d8 001d36d8 2**2
CONTENTS, ALLOC, LOAD, DATA
11 .data.cacheline_aligned 00001470 80223000 80223000 001d4000 2**4
CONTENTS, ALLOC, LOAD, DATA
12 .reginfo 00000018 80224470 80224470 001d5470 2**2
CONTENTS, ALLOC, LOAD, READONLY, DATA, LINK_ONCE_SAME_SIZE
13 .data 0001a000 80225000 80225000 001d6000 2**12
CONTENTS, ALLOC, LOAD, DATA
14 .bss 0002ce90 8023f000 8023f000 001f0000 2**4
ALLOC
15 .comment 00002cce 8026be90 8026be90 001f0000 2**0
CONTENTS, READONLY
16 .pdr 00027ae0 00000000 00000000 001f2cd0 2**2
CONTENTS, READONLY
17 .mdebug.abi32 00000000 00000000 00000000 0021a7b0 2**0
CONTENTS, READONLY
-------------------------------------------
new vmlinux with patching:
vmlinux: file format elf32-tradlittlemips
Sections:
Idx Name Size VMA LMA File off Algn
0 .text 001aa000 80050000 80050000 00001000 2**5
CONTENTS, ALLOC, LOAD, READONLY, CODE
1 .fixup 00001250 801fa000 801fa000 001ab000 2**0
CONTENTS, ALLOC, LOAD, READONLY, CODE
2 .kstrtab 00005000 801fb250 801fb250 001ac250 2**2
CONTENTS, ALLOC, LOAD, READONLY, DATA
3 __ex_table 000016d8 80200250 80200250 001b1250 2**2
CONTENTS, ALLOC, LOAD, READONLY, DATA
4 __dbe_table 00000000 80201928 80201928 001b2928 2**0
CONTENTS, ALLOC, LOAD, READONLY, DATA
5 __ksymtab 000025a8 80201928 80201928 001b2928 2**2
CONTENTS, ALLOC, LOAD, READONLY, DATA
6 .data.init_task 00002000 80204000 80204000 001b5000 2**3
CONTENTS, ALLOC, LOAD, DATA
7 .text.init 0001763c 80206000 80206000 001b7000 2**2
CONTENTS, ALLOC, LOAD, READONLY, CODE
8 .data.init 000050e0 8021d63c 8021d63c 001ce63c 2**2
CONTENTS, ALLOC, LOAD, DATA
9 .setup.init 000000e8 80222720 80222720 001d3720 2**2
CONTENTS, ALLOC, LOAD, DATA
10 .initcall.init 000000ac 80222808 80222808 001d3808 2**2
CONTENTS, ALLOC, LOAD, DATA
11 .data.cacheline_aligned 00001470 80223000 80223000 001d4000 2**4
CONTENTS, ALLOC, LOAD, DATA
12 .reginfo 00000018 80224470 80224470 001d5470 2**2
CONTENTS, ALLOC, LOAD, READONLY, DATA, LINK_ONCE_SAME_SIZE
13 .data 0001a000 80225000 80225000 001d6000 2**12
CONTENTS, ALLOC, LOAD, DATA
14 .bss 0002ce40 8023f000 8023f000 001f0000 2**4
ALLOC
15 .comment 00002cce 8026be40 8026be40 001f0000 2**0
CONTENTS, READONLY
16 .pdr 00027a00 00000000 00000000 001f2cd0 2**2
CONTENTS, READONLY
17 .mdebug.abi32 00000000 00000000 00000000 0021a6d0 2**0
CONTENTS, READONLY
More information about the linux-mtd
mailing list