RedBoot from DoC not working quite well

[Iztok Zupet]

On Monday 01 July 2002 16:03, Iztok Zupet wrote:
> On Monday 01 July 2002 15:41, Jasmine Strong wrote:
> > On Mon, 1 Jul 2002, Iztok Zupet wrote:
> > > RedBoot boots fine (int18 or int19). But after formating my DoC with
> > >
> > > nftl_format utility:
> > > 	>>> nftl_format /dev/mtd0 128000
> >
> > You can't start a format from that address.  It's not an erase block
> > boundary.  (Most DoC devices have 8k erase blocks.  THat means 8192
> > bytes, not 8000.)
> >
> > Try erasing from 131072, rather than 128000.
> >
> > Jas.
>
>  I tried but it still owerwrites or erases my RedBoot.
> Size of my redboot_firmware is exactly 123.2K.
>
> Regards
> iz
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/

 It OK now . My RedBoot firware was 8K bytes too big, eg it loaded yust a 
little pass the 0x20000 in DoC.

Regards
iz