UnitSizeFactor of != 1 yet?

[Brian P. Austin]

Hello all,

I have switched from the msys driver and moved to mtd.  Everything
compiles fine and this is what I get at boot up.

Using configured DiskOnChip probe address 0xd0000
DiskOnChip 2000 found at address 0xD0000
Flash chip found: Manufacturer ID: 98, Chip ID: 75 (Toshiba TC58256FT/DC)
9 flash chips found. Total DiskOnChip size: 288 MiB
mtd: Giving out device 0 to DiskOnChip 2000
NFTL driver: nftlcore.c $Revision: 1.82 $, nftlmount.c $Revision: 1.25 $
NFTL_notify_add for DiskOnChip 2000
NFTL_setup
Sorry, we don't support UnitSizeFactor of != 1 yet.
Could not find valid boot record
Could not mount NFTL device

when I do cat /proc/mtd, I get the following.

dev:    size   erasesize  name
mtd0: 12000000 00004000 "DiskOnChip 2000"

I'm using a DOC 2000 288MB flash chip with the DOC43.exb file on it.

I guess my question is...

What does "Sorry, we don't support UnitSizeFactor of != 1 yet." mean?

thanks in advance.

Brian Austin