problem using jffs2 on DiskOnChip

[Carl Wolff]

> -----Original Message-----
> From: linux-mtd-admin at lists.infradead.org
> [mailto:linux-mtd-admin at lists.infradead.org]On Behalf Of Russ Dill
> Sent: woensdag 18 december 2002 20:14
> To: wolff at turnkiek.nl
> Cc: linux-mtd at lists.infradead.org
> Subject: Re: problem using jffs2 on DiskOnChip
>
>
> On Wed, 2002-12-18 at 12:03, Carl Wolff wrote:
> > Hello,
> >
> > I've got a problem with jffs2. I'm using a DiskOnChip
> module type milennium.
> >
> > Do I need NFTL support?
> > I've managed to copy a jffs2 image onto the diskonchip
> using cp image
> > /dev/mtd/0.
>
> eraseall /dev/mtd/0

I did it. I checked the contents after the eraseall and saw only FF's.
Then I copied the image and verified the contents of the device with the
orginial file: they are the same.
So I think the data is correctly put into the flash....

>
> --
> Russ Dill <Russ.Dill at asu.edu>
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>