Intel I28F160B3T flash support on Linux JFFS2

[yuan cain]

Hi all,
       I am now using Intel I28F160B3 flash chip with uClinux 2.4.17 but 
currectly  JEDEC probe can't   notice the  flash chip.  I tracd  but find 
that the base addres is not the same I want it to probe, the physical 
address of the flash is 0x1400000. Below is the message when boot up:
....
Output from jedec_probe.
In function mtd_do_chip_probe,call genprobe_ident_chips next.
In function genprobe_ident_chips, call genprobe_new_chip() next.
In function genprobe_new_chip, show the parameter as below:
Cain: output from jedec_probe_chip. The base address is 0x0.
Search for id:(e1a0 e1a0) interleave(1) type(2)
Search for id:(e1a0 e1a0) interleave(1) type(2)
JEDEC: Found no S3C4510B Flash device at location 0x1400000
JEDEC  probe failed.
...

Any advices?   TIA!!





_________________________________________________________________
与联机的朋友进行交流，请使用 MSN Messenger: 
http://messenger.microsoft.com/cn