mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Mon May 23 21:59:11 PDT 2016
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=846031d3e1837b71e350bd8098f00995069859a8
Commit: 846031d3e1837b71e350bd8098f00995069859a8
Parent: c2b78452a9db438d592bf72af7bb2ae3062cb922
Author: Boris Brezillon <boris.brezillon at free-electrons.com>
AuthorDate: Wed Feb 3 20:11:00 2016 +0100
Committer: Boris Brezillon <boris.brezillon at free-electrons.com>
CommitDate: Tue Apr 19 22:05:49 2016 +0200
mtd: nand: core: use mtd_ooblayout_xxx() helpers where appropriate
The mtd_ooblayout_xxx() helper functions have been added to avoid direct
accesses to the ecclayout field, and thus ease for future reworks.
Use these helpers in all places where the oobfree[] and eccpos[] arrays
where directly accessed.
Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
drivers/mtd/nand/nand_base.c | 200 +++++++++++++++++++------------------------
drivers/mtd/nand/nand_bch.c | 13 ++-
2 files changed, 100 insertions(+), 113 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 13fcddc..24ed445 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1279,13 +1279,12 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
- int i, eccsize = chip->ecc.size;
+ int i, eccsize = chip->ecc.size, ret;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *ecc_calc = chip->buffers->ecccalc;
uint8_t *ecc_code = chip->buffers->ecccode;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
unsigned int max_bitflips = 0;
chip->ecc.read_page_raw(mtd, chip, buf, 1, page);
@@ -1293,8 +1292,10 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
- for (i = 0; i < chip->ecc.total; i++)
- ecc_code[i] = chip->oob_poi[eccpos[i]];
+ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
eccsteps = chip->ecc.steps;
p = buf;
@@ -1326,14 +1327,14 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi,
int page)
{
- int start_step, end_step, num_steps;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
+ int start_step, end_step, num_steps, ret;
uint8_t *p;
int data_col_addr, i, gaps = 0;
int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
- int index;
+ int index, section = 0;
unsigned int max_bitflips = 0;
+ struct mtd_oob_region oobregion = { };
/* Column address within the page aligned to ECC size (256bytes) */
start_step = data_offs / chip->ecc.size;
@@ -1361,12 +1362,13 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
* The performance is faster if we position offsets according to
* ecc.pos. Let's make sure that there are no gaps in ECC positions.
*/
- for (i = 0; i < eccfrag_len - 1; i++) {
- if (eccpos[i + index] + 1 != eccpos[i + index + 1]) {
- gaps = 1;
- break;
- }
- }
+ ret = mtd_ooblayout_find_eccregion(mtd, index, §ion, &oobregion);
+ if (ret)
+ return ret;
+
+ if (oobregion.length < eccfrag_len)
+ gaps = 1;
+
if (gaps) {
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -1375,20 +1377,23 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
* Send the command to read the particular ECC bytes take care
* about buswidth alignment in read_buf.
*/
- aligned_pos = eccpos[index] & ~(busw - 1);
+ aligned_pos = oobregion.offset & ~(busw - 1);
aligned_len = eccfrag_len;
- if (eccpos[index] & (busw - 1))
+ if (oobregion.offset & (busw - 1))
aligned_len++;
- if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1))
+ if ((oobregion.offset + (num_steps * chip->ecc.bytes)) &
+ (busw - 1))
aligned_len++;
chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
- mtd->writesize + aligned_pos, -1);
+ mtd->writesize + aligned_pos, -1);
chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
}
- for (i = 0; i < eccfrag_len; i++)
- chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]];
+ ret = mtd_ooblayout_get_eccbytes(mtd, chip->buffers->ecccode,
+ chip->oob_poi, index, eccfrag_len);
+ if (ret)
+ return ret;
p = bufpoi + data_col_addr;
for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
@@ -1429,13 +1434,12 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
- int i, eccsize = chip->ecc.size;
+ int i, eccsize = chip->ecc.size, ret;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *ecc_calc = chip->buffers->ecccalc;
uint8_t *ecc_code = chip->buffers->ecccode;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
unsigned int max_bitflips = 0;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
@@ -1445,8 +1449,10 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
}
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
- for (i = 0; i < chip->ecc.total; i++)
- ecc_code[i] = chip->oob_poi[eccpos[i]];
+ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
eccsteps = chip->ecc.steps;
p = buf;
@@ -1491,12 +1497,11 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
{
- int i, eccsize = chip->ecc.size;
+ int i, eccsize = chip->ecc.size, ret;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *ecc_code = chip->buffers->ecccode;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
uint8_t *ecc_calc = chip->buffers->ecccalc;
unsigned int max_bitflips = 0;
@@ -1505,8 +1510,10 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
- for (i = 0; i < chip->ecc.total; i++)
- ecc_code[i] = chip->oob_poi[eccpos[i]];
+ ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
int stat;
@@ -1607,14 +1614,17 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
/**
* nand_transfer_oob - [INTERN] Transfer oob to client buffer
- * @chip: nand chip structure
+ * @mtd: mtd info structure
* @oob: oob destination address
* @ops: oob ops structure
* @len: size of oob to transfer
*/
-static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
+static uint8_t *nand_transfer_oob(struct mtd_info *mtd, uint8_t *oob,
struct mtd_oob_ops *ops, size_t len)
{
+ struct nand_chip *chip = mtd_to_nand(mtd);
+ int ret;
+
switch (ops->mode) {
case MTD_OPS_PLACE_OOB:
@@ -1622,31 +1632,12 @@ static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
memcpy(oob, chip->oob_poi + ops->ooboffs, len);
return oob + len;
- case MTD_OPS_AUTO_OOB: {
- struct nand_oobfree *free = chip->ecc.layout->oobfree;
- uint32_t boffs = 0, roffs = ops->ooboffs;
- size_t bytes = 0;
-
- for (; free->length && len; free++, len -= bytes) {
- /* Read request not from offset 0? */
- if (unlikely(roffs)) {
- if (roffs >= free->length) {
- roffs -= free->length;
- continue;
- }
- boffs = free->offset + roffs;
- bytes = min_t(size_t, len,
- (free->length - roffs));
- roffs = 0;
- } else {
- bytes = min_t(size_t, len, free->length);
- boffs = free->offset;
- }
- memcpy(oob, chip->oob_poi + boffs, bytes);
- oob += bytes;
- }
- return oob;
- }
+ case MTD_OPS_AUTO_OOB:
+ ret = mtd_ooblayout_get_databytes(mtd, oob, chip->oob_poi,
+ ops->ooboffs, len);
+ BUG_ON(ret);
+ return oob + len;
+
default:
BUG();
}
@@ -1780,7 +1771,7 @@ read_retry:
int toread = min(oobreadlen, max_oobsize);
if (toread) {
- oob = nand_transfer_oob(chip,
+ oob = nand_transfer_oob(mtd,
oob, ops, toread);
oobreadlen -= toread;
}
@@ -2080,7 +2071,7 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
break;
len = min(len, readlen);
- buf = nand_transfer_oob(chip, buf, ops, len);
+ buf = nand_transfer_oob(mtd, buf, ops, len);
if (chip->options & NAND_NEED_READRDY) {
/* Apply delay or wait for ready/busy pin */
@@ -2239,19 +2230,20 @@ static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required,
int page)
{
- int i, eccsize = chip->ecc.size;
+ int i, eccsize = chip->ecc.size, ret;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *ecc_calc = chip->buffers->ecccalc;
const uint8_t *p = buf;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
/* Software ECC calculation */
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
- for (i = 0; i < chip->ecc.total; i++)
- chip->oob_poi[eccpos[i]] = ecc_calc[i];
+ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
return chip->ecc.write_page_raw(mtd, chip, buf, 1, page);
}
@@ -2268,12 +2260,11 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required,
int page)
{
- int i, eccsize = chip->ecc.size;
+ int i, eccsize = chip->ecc.size, ret;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *ecc_calc = chip->buffers->ecccalc;
const uint8_t *p = buf;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
@@ -2281,8 +2272,10 @@ static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
}
- for (i = 0; i < chip->ecc.total; i++)
- chip->oob_poi[eccpos[i]] = ecc_calc[i];
+ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -2310,11 +2303,10 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd,
int ecc_size = chip->ecc.size;
int ecc_bytes = chip->ecc.bytes;
int ecc_steps = chip->ecc.steps;
- uint32_t *eccpos = chip->ecc.layout->eccpos;
uint32_t start_step = offset / ecc_size;
uint32_t end_step = (offset + data_len - 1) / ecc_size;
int oob_bytes = mtd->oobsize / ecc_steps;
- int step, i;
+ int step, ret;
for (step = 0; step < ecc_steps; step++) {
/* configure controller for WRITE access */
@@ -2342,8 +2334,10 @@ static int nand_write_subpage_hwecc(struct mtd_info *mtd,
/* copy calculated ECC for whole page to chip->buffer->oob */
/* this include masked-value(0xFF) for unwritten subpages */
ecc_calc = chip->buffers->ecccalc;
- for (i = 0; i < chip->ecc.total; i++)
- chip->oob_poi[eccpos[i]] = ecc_calc[i];
+ ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+ chip->ecc.total);
+ if (ret)
+ return ret;
/* write OOB buffer to NAND device */
chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -2480,6 +2474,7 @@ static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
struct mtd_oob_ops *ops)
{
struct nand_chip *chip = mtd_to_nand(mtd);
+ int ret;
/*
* Initialise to all 0xFF, to avoid the possibility of left over OOB
@@ -2494,31 +2489,12 @@ static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
memcpy(chip->oob_poi + ops->ooboffs, oob, len);
return oob + len;
- case MTD_OPS_AUTO_OOB: {
- struct nand_oobfree *free = chip->ecc.layout->oobfree;
- uint32_t boffs = 0, woffs = ops->ooboffs;
- size_t bytes = 0;
-
- for (; free->length && len; free++, len -= bytes) {
- /* Write request not from offset 0? */
- if (unlikely(woffs)) {
- if (woffs >= free->length) {
- woffs -= free->length;
- continue;
- }
- boffs = free->offset + woffs;
- bytes = min_t(size_t, len,
- (free->length - woffs));
- woffs = 0;
- } else {
- bytes = min_t(size_t, len, free->length);
- boffs = free->offset;
- }
- memcpy(chip->oob_poi + boffs, oob, bytes);
- oob += bytes;
- }
- return oob;
- }
+ case MTD_OPS_AUTO_OOB:
+ ret = mtd_ooblayout_set_databytes(mtd, oob, chip->oob_poi,
+ ops->ooboffs, len);
+ BUG_ON(ret);
+ return oob + len;
+
default:
BUG();
}
@@ -4105,7 +4081,6 @@ static bool nand_ecc_strength_good(struct mtd_info *mtd)
*/
int nand_scan_tail(struct mtd_info *mtd)
{
- int i;
struct nand_chip *chip = mtd_to_nand(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
struct nand_buffers *nbuf;
@@ -4309,20 +4284,10 @@ int nand_scan_tail(struct mtd_info *mtd)
if (!ecc->write_oob_raw)
ecc->write_oob_raw = ecc->write_oob;
- /*
- * The number of bytes available for a client to place data into
- * the out of band area.
- */
- mtd->oobavail = 0;
- if (ecc->layout) {
- for (i = 0; ecc->layout->oobfree[i].length; i++)
- mtd->oobavail += ecc->layout->oobfree[i].length;
- }
-
- /* ECC sanity check: warn if it's too weak */
- if (!nand_ecc_strength_good(mtd))
- pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
- mtd->name);
+ /* propagate ecc info to mtd_info */
+ mtd->ecclayout = ecc->layout;
+ mtd->ecc_strength = ecc->strength;
+ mtd->ecc_step_size = ecc->size;
/*
* Set the number of read / write steps for one page depending on ECC
@@ -4336,6 +4301,21 @@ int nand_scan_tail(struct mtd_info *mtd)
}
ecc->total = ecc->steps * ecc->bytes;
+ /*
+ * The number of bytes available for a client to place data into
+ * the out of band area.
+ */
+ ret = mtd_ooblayout_count_freebytes(mtd);
+ if (ret < 0)
+ ret = 0;
+
+ mtd->oobavail = ret;
+
+ /* ECC sanity check: warn if it's too weak */
+ if (!nand_ecc_strength_good(mtd))
+ pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
+ mtd->name);
+
/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
switch (ecc->steps) {
@@ -4392,10 +4372,6 @@ int nand_scan_tail(struct mtd_info *mtd)
mtd->_block_markbad = nand_block_markbad;
mtd->writebufsize = mtd->writesize;
- /* propagate ecc info to mtd_info */
- mtd->ecclayout = ecc->layout;
- mtd->ecc_strength = ecc->strength;
- mtd->ecc_step_size = ecc->size;
/*
* Initialize bitflip_threshold to its default prior scan_bbt() call.
* scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c
index b585bae..d8c03eb 100644
--- a/drivers/mtd/nand/nand_bch.c
+++ b/drivers/mtd/nand/nand_bch.c
@@ -196,7 +196,18 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
printk(KERN_WARNING "eccsize %u is too large\n", eccsize);
goto fail;
}
- if (layout->eccbytes != (eccsteps*eccbytes)) {
+
+ /*
+ * ecc->steps and ecc->total might be used by mtd->ooblayout->ecc(),
+ * which is called by mtd_ooblayout_count_eccbytes().
+ * Make sure they are properly initialized before calling
+ * mtd_ooblayout_count_eccbytes().
+ * FIXME: we should probaly rework the sequencing in nand_scan_tail()
+ * to avoid setting those fields twice.
+ */
+ nand->ecc.steps = eccsteps;
+ nand->ecc.total = eccsteps * eccbytes;
+ if (mtd_ooblayout_count_eccbytes(mtd) != (eccsteps*eccbytes)) {
printk(KERN_WARNING "invalid ecc layout\n");
goto fail;
}
More information about the linux-mtd-cvs
mailing list