mtd: nand: denali: remove debug lines of __FILE__, __LINE__, __func__

[Linux-MTD Mailing List]

Gitweb:     http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=fc80f21a11156dd01c5ef14153e6f9e1291ccb82
Commit:     fc80f21a11156dd01c5ef14153e6f9e1291ccb82
Parent:     01a1d524eb68c0395074dd1d661b119ac96edba1
Author:     Masahiro Yamada <yamada.masahiro at socionext.com>
AuthorDate: Wed Nov 9 13:35:30 2016 +0900
Committer:  Boris Brezillon <boris.brezillon at free-electrons.com>
CommitDate: Sat Nov 19 09:40:42 2016 +0100

    mtd: nand: denali: remove debug lines of __FILE__, __LINE__, __func__
    
    Such debug lines might be useful when debugging the driver first,
    but should be deleted from the upstream code.
    
    Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
    Reviewed-by: Marek Vasut <marek.vasut at gmail.com>
    Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
 drivers/mtd/nand/denali.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 4b0b51b..73b9d4e 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -181,9 +181,6 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali)
 {
 	int i;
 
-	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
-		__FILE__, __LINE__, __func__);
-
 	for (i = 0; i < denali->max_banks; i++)
 		iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
 		denali->flash_reg + INTR_STATUS(i));
@@ -233,9 +230,6 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
 	uint16_t acc_clks;
 	uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
 
-	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
-		__FILE__, __LINE__, __func__);
-
 	en_lo = CEIL_DIV(Trp[mode], CLK_X);
 	en_hi = CEIL_DIV(Treh[mode], CLK_X);
 #if ONFI_BLOOM_TIME
@@ -480,9 +474,6 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
 	uint8_t maf_id, device_id;
 	int i;
 
-	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
-			__FILE__, __LINE__, __func__);
-
 	/*
 	 * Use read id method to get device ID and other params.
 	 * For some NAND chips, controller can't report the correct
@@ -537,9 +528,6 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
 static void denali_set_intr_modes(struct denali_nand_info *denali,
 					uint16_t INT_ENABLE)
 {
-	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
-		__FILE__, __LINE__, __func__);
-
 	if (INT_ENABLE)
 		iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE);
 	else