mtd: nand: change return type of nand_get_flash_type() to int

Linux-MTD Mailing List linux-mtd at lists.infradead.org
Fri Dec 16 11:59:04 PST 2016


Gitweb:     http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=4722c0e958e636226100f37cd6d17ac09b695827
Commit:     4722c0e958e636226100f37cd6d17ac09b695827
Parent:     a1a261707b51d728d0c2b4c32630bc43a8eb33b2
Author:     Masahiro Yamada <yamada.masahiro at socionext.com>
AuthorDate: Fri Nov 4 17:49:08 2016 +0900
Committer:  Boris Brezillon <boris.brezillon at free-electrons.com>
CommitDate: Mon Nov 7 14:48:40 2016 +0100

    mtd: nand: change return type of nand_get_flash_type() to int
    
    Since commit d1e1f4e42b5d ("mtd: nand: add support for reading ONFI
    parameters from NAND device"), the returned "type" is never used in
    nand_scan_ident().
    
    Make nand_get_flash_type() simply return an integer value in order
    to avoid unnecessary ERR_PTR/PTR_ERR dance.
    
    Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
    Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
 drivers/mtd/nand/nand_base.c | 24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 0acb007..4d099d4 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3999,10 +3999,9 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
 /*
  * Get the flash and manufacturer id and lookup if the type is supported.
  */
-static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
-						  struct nand_chip *chip,
-						  int *maf_id, int *dev_id,
-						  struct nand_flash_dev *type)
+static int nand_get_flash_type(struct mtd_info *mtd, struct nand_chip *chip,
+			       int *maf_id, int *dev_id,
+			       struct nand_flash_dev *type)
 {
 	int busw;
 	int i, maf_idx;
@@ -4040,7 +4039,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 	if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
 		pr_info("second ID read did not match %02x,%02x against %02x,%02x\n",
 			*maf_id, *dev_id, id_data[0], id_data[1]);
-		return ERR_PTR(-ENODEV);
+		return -ENODEV;
 	}
 
 	if (!type)
@@ -4067,7 +4066,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
 	}
 
 	if (!type->name)
-		return ERR_PTR(-ENODEV);
+		return -ENODEV;
 
 	if (!mtd->name)
 		mtd->name = type->name;
@@ -4112,7 +4111,7 @@ ident_done:
 		pr_warn("bus width %d instead %d bit\n",
 			   (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
 			   busw ? 16 : 8);
-		return ERR_PTR(-EINVAL);
+		return -EINVAL;
 	}
 
 	nand_decode_bbm_options(mtd, chip, id_data);
@@ -4154,7 +4153,7 @@ ident_done:
 	pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
 		(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
 		mtd->erasesize >> 10, mtd->writesize, mtd->oobsize);
-	return type;
+	return 0;
 }
 
 static const char * const nand_ecc_modes[] = {
@@ -4320,7 +4319,6 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 {
 	int i, nand_maf_id, nand_dev_id;
 	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_flash_dev *type;
 	int ret;
 
 	ret = nand_dt_init(chip);
@@ -4343,14 +4341,12 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips,
 	nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);
 
 	/* Read the flash type */
-	type = nand_get_flash_type(mtd, chip, &nand_maf_id,
-				   &nand_dev_id, table);
-
-	if (IS_ERR(type)) {
+	ret = nand_get_flash_type(mtd, chip, &nand_maf_id, &nand_dev_id, table);
+	if (ret) {
 		if (!(chip->options & NAND_SCAN_SILENT_NODEV))
 			pr_warn("No NAND device found\n");
 		chip->select_chip(mtd, -1);
-		return PTR_ERR(type);
+		return ret;
 	}
 
 	ret = nand_init_data_interface(chip);



More information about the linux-mtd-cvs mailing list