mtd: nand: xway: add nandaddr to own struct

Linux-MTD Mailing List linux-mtd at lists.infradead.org
Mon Aug 1 18:59:08 PDT 2016


Gitweb:     http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=37987ba4d15f13082d9f3ea6802f6b8bce89695f
Commit:     37987ba4d15f13082d9f3ea6802f6b8bce89695f
Parent:     250d45eb828a48bcfe0ef32ef861ea950e3483fc
Author:     Hauke Mehrtens <hauke at hauke-m.de>
AuthorDate: Mon Jun 20 23:32:14 2016 +0200
Committer:  Boris Brezillon <boris.brezillon at free-electrons.com>
CommitDate: Mon Jul 11 08:40:17 2016 +0200

    mtd: nand: xway: add nandaddr to own struct
    
    Instead of using IO_ADDR_W and IO_ADDR_R use an own pointer to the NAND
    controller memory area.
    
    Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
    Signed-off-by: Boris Brezillon <boris.brezillon at free-electrons.com>
---
 drivers/mtd/nand/xway_nand.c | 30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
index 429ba02..1f2948c 100644
--- a/drivers/mtd/nand/xway_nand.c
+++ b/drivers/mtd/nand/xway_nand.c
@@ -66,22 +66,23 @@
 struct xway_nand_data {
 	struct nand_chip	chip;
 	unsigned long		csflags;
+	void __iomem		*nandaddr;
 };
 
 static u8 xway_readb(struct mtd_info *mtd, int op)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
-	void __iomem *nandaddr = chip->IO_ADDR_R;
+	struct xway_nand_data *data = nand_get_controller_data(chip);
 
-	return readb(nandaddr + op);
+	return readb(data->nandaddr + op);
 }
 
 static void xway_writeb(struct mtd_info *mtd, int op, u8 value)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
-	void __iomem *nandaddr = chip->IO_ADDR_W;
+	struct xway_nand_data *data = nand_get_controller_data(chip);
 
-	writeb(value, nandaddr + op);
+	writeb(value, data->nandaddr + op);
 }
 
 static void xway_select_chip(struct mtd_info *mtd, int select)
@@ -154,7 +155,6 @@ static int xway_nand_probe(struct platform_device *pdev)
 	struct mtd_info *mtd;
 	struct resource *res;
 	int err;
-	void __iomem *nandaddr;
 	u32 cs;
 	u32 cs_flag = 0;
 
@@ -165,16 +165,14 @@ static int xway_nand_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	nandaddr = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(nandaddr))
-		return PTR_ERR(nandaddr);
+	data->nandaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->nandaddr))
+		return PTR_ERR(data->nandaddr);
 
 	nand_set_flash_node(&data->chip, pdev->dev.of_node);
 	mtd = nand_to_mtd(&data->chip);
 	mtd->dev.parent = &pdev->dev;
 
-	data->chip.IO_ADDR_R = nandaddr;
-	data->chip.IO_ADDR_W = nandaddr;
 	data->chip.cmd_ctrl = xway_cmd_ctrl;
 	data->chip.dev_ready = xway_dev_ready;
 	data->chip.select_chip = xway_select_chip;
@@ -195,16 +193,16 @@ static int xway_nand_probe(struct platform_device *pdev)
 		cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
 
 	/* setup the EBU to run in NAND mode on our base addr */
-	ltq_ebu_w32(CPHYSADDR(nandaddr)
-		| ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
+	ltq_ebu_w32(CPHYSADDR(data->nandaddr)
+		    | ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
 
 	ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2
-		| BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
-		| BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
+		    | BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
+		    | BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
 
 	ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P
-		| NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
-		| cs_flag, EBU_NAND_CON);
+		    | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
+		    | cs_flag, EBU_NAND_CON);
 
 	/* Scan to find existence of the device */
 	err = nand_scan(mtd, 1);



More information about the linux-mtd-cvs mailing list