mtd: hisilicon: add device tree binding documentation

Linux-MTD Mailing List linux-mtd at lists.infradead.org
Mon Feb 16 18:59:06 PST 2015


Gitweb:     http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=72f55d74bd12e66151d6db79d179cae678bcd290
Commit:     72f55d74bd12e66151d6db79d179cae678bcd290
Parent:     54f531f6e332875bd8a604871532f7f1174adc0e
Author:     Zhou Wang <wangzhou1 at hisilicon.com>
AuthorDate: Sun Jan 25 18:53:14 2015 +0800
Committer:  Brian Norris <computersforpeace at gmail.com>
CommitDate: Sun Feb 8 00:20:20 2015 -0800

    mtd: hisilicon: add device tree binding documentation
    
    This patch adds the related dts binding document for Hisilicon 504 NAND
    controller.
    
    Signed-off-by: Zhou Wang <wangzhou1 at hisilicon.com>
    Signed-off-by: Brian Norris <computersforpeace at gmail.com>
---
 .../devicetree/bindings/mtd/hisi504-nand.txt       | 47 ++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/hisi504-nand.txt b/Documentation/devicetree/bindings/mtd/hisi504-nand.txt
new file mode 100644
index 0000000..2e35f06
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/hisi504-nand.txt
@@ -0,0 +1,47 @@
+Hisilicon Hip04 Soc NAND controller DT binding
+
+Required properties:
+
+- compatible:          Should be "hisilicon,504-nfc".
+- reg:                 The first contains base physical address and size of
+                       NAND controller's registers. The second contains base
+                       physical address and size of NAND controller's buffer.
+- interrupts:          Interrupt number for nfc.
+- nand-bus-width:      See nand.txt.
+- nand-ecc-mode:       Support none and hw ecc mode.
+- #address-cells:      Partition address, should be set 1.
+- #size-cells:         Partition size, should be set 1.
+
+Optional properties:
+
+- nand-ecc-strength:   Number of bits to correct per ECC step.
+- nand-ecc-step-size:  Number of data bytes covered by a single ECC step.
+
+The following ECC strength and step size are currently supported:
+
+ - nand-ecc-strength = <16>, nand-ecc-step-size = <1024>
+
+Flash chip may optionally contain additional sub-nodes describing partitions of
+the address space. See partition.txt for more detail.
+
+Example:
+
+	nand: nand at 4020000 {
+		compatible = "hisilicon,504-nfc";
+		reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
+		interrupts = <0 379 4>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <16>;
+		nand-ecc-step-size = <1024>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition at 0 {
+			label = "nand_text";
+			reg = <0x00000000 0x00400000>;
+		};
+
+		...
+
+	};



More information about the linux-mtd-cvs mailing list