mtd: nand: refactor erase_cmd() to return chip status

Linux-MTD Mailing List linux-mtd at lists.infradead.org
Tue Jun 10 23:59:06 PDT 2014


Gitweb:     http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=49c50b97b5522a987b80fbbf9d9869deee8d23b0
Commit:     49c50b97b5522a987b80fbbf9d9869deee8d23b0
Parent:     35fc51956b53eb52f7c4c78aa6157381196cd5ce
Author:     Brian Norris <computersforpeace at gmail.com>
AuthorDate: Tue May 6 16:02:19 2014 -0700
Committer:  Brian Norris <computersforpeace at gmail.com>
CommitDate: Fri May 9 13:19:42 2014 -0700

    mtd: nand: refactor erase_cmd() to return chip status
    
    The nand_chip::erase_cmd callback previously served a dual purpose; for
    one, it allowed a per-flash-chip override, so that AG-AND devices could
    use a different erase command than other NAND. These AND devices were
    dropped in commit 14c6578683367b1e7af0c3c09e872b45a45183a7 (mtd: nand:
    remove AG-AND support). On the other hand, some drivers (denali and
    doc-g4) need to use this sort of callback to implement
    controller-specific erase operations.
    
    To make the latter operation easier for some drivers (e.g., ST's new BCH
    NAND driver), it helps if the command dispatch and wait functions can be
    lumped together, rather than called separately.
    
    This patch does two things:
     1. Pull the call to chip->waitfunc() into chip->erase_cmd(), and return
        the status from this callback
     2. Rename erase_cmd() to just erase(), since this callback does a
        little more than just send a command
    
    Signed-off-by: Brian Norris <computersforpeace at gmail.com>
    Tested-by: Lee Jones <lee.jones at linaro.org>
---
 drivers/mtd/nand/denali.c    |  7 +++----
 drivers/mtd/nand/docg4.c     |  6 ++++--
 drivers/mtd/nand/nand_base.c | 14 +++++++-------
 include/linux/mtd/nand.h     |  5 ++---
 4 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index c07cd57..9f2012a 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1233,7 +1233,7 @@ static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
 	return status;
 }
 
-static void denali_erase(struct mtd_info *mtd, int page)
+static int denali_erase(struct mtd_info *mtd, int page)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
 
@@ -1250,8 +1250,7 @@ static void denali_erase(struct mtd_info *mtd, int page)
 	irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP |
 					INTR_STATUS__ERASE_FAIL);
 
-	denali->status = (irq_status & INTR_STATUS__ERASE_FAIL) ?
-						NAND_STATUS_FAIL : PASS;
+	return (irq_status & INTR_STATUS__ERASE_FAIL) ? NAND_STATUS_FAIL : PASS;
 }
 
 static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
@@ -1584,7 +1583,7 @@ int denali_init(struct denali_nand_info *denali)
 	denali->nand.ecc.write_page_raw = denali_write_page_raw;
 	denali->nand.ecc.read_oob = denali_read_oob;
 	denali->nand.ecc.write_oob = denali_write_oob;
-	denali->nand.erase_cmd = denali_erase;
+	denali->nand.erase = denali_erase;
 
 	if (nand_scan_tail(&denali->mtd)) {
 		ret = -ENXIO;
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
index 1b0265e..ce24637 100644
--- a/drivers/mtd/nand/docg4.c
+++ b/drivers/mtd/nand/docg4.c
@@ -872,7 +872,7 @@ static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
 	return 0;
 }
 
-static void docg4_erase_block(struct mtd_info *mtd, int page)
+static int docg4_erase_block(struct mtd_info *mtd, int page)
 {
 	struct nand_chip *nand = mtd->priv;
 	struct docg4_priv *doc = nand->priv;
@@ -916,6 +916,8 @@ static void docg4_erase_block(struct mtd_info *mtd, int page)
 	write_nop(docptr);
 	poll_status(doc);
 	write_nop(docptr);
+
+	return nand->waitfunc(mtd, nand);
 }
 
 static int write_page(struct mtd_info *mtd, struct nand_chip *nand,
@@ -1236,7 +1238,7 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
 	nand->block_markbad = docg4_block_markbad;
 	nand->read_buf = docg4_read_buf;
 	nand->write_buf = docg4_write_buf16;
-	nand->erase_cmd = docg4_erase_block;
+	nand->erase = docg4_erase_block;
 	nand->ecc.read_page = docg4_read_page;
 	nand->ecc.write_page = docg4_write_page;
 	nand->ecc.read_page_raw = docg4_read_page_raw;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index f6c5685..7853b9b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2617,18 +2617,20 @@ out:
 }
 
 /**
- * single_erase_cmd - [GENERIC] NAND standard block erase command function
+ * single_erase - [GENERIC] NAND standard block erase command function
  * @mtd: MTD device structure
  * @page: the page address of the block which will be erased
  *
- * Standard erase command for NAND chips.
+ * Standard erase command for NAND chips. Returns NAND status.
  */
-static void single_erase_cmd(struct mtd_info *mtd, int page)
+static int single_erase(struct mtd_info *mtd, int page)
 {
 	struct nand_chip *chip = mtd->priv;
 	/* Send commands to erase a block */
 	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
 	chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+
+	return chip->waitfunc(mtd, chip);
 }
 
 /**
@@ -2709,9 +2711,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
 		    (page + pages_per_block))
 			chip->pagebuf = -1;
 
-		chip->erase_cmd(mtd, page & chip->pagemask);
-
-		status = chip->waitfunc(mtd, chip);
+		status = chip->erase(mtd, page & chip->pagemask);
 
 		/*
 		 * See if operation failed and additional status checks are
@@ -3684,7 +3684,7 @@ ident_done:
 	}
 
 	chip->badblockbits = 8;
-	chip->erase_cmd = single_erase_cmd;
+	chip->erase = single_erase;
 
 	/* Do not replace user supplied command function! */
 	if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 450d61e..7a922e6 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -552,8 +552,7 @@ struct nand_buffers {
  * @ecc:		[BOARDSPECIFIC] ECC control structure
  * @buffers:		buffer structure for read/write
  * @hwcontrol:		platform-specific hardware control structure
- * @erase_cmd:		[INTERN] erase command write function, selectable due
- *			to AND support.
+ * @erase:		[REPLACEABLE] erase function
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
  * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transferring
  *			data from array to read regs (tR).
@@ -637,7 +636,7 @@ struct nand_chip {
 	void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
 			int page_addr);
 	int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
-	void (*erase_cmd)(struct mtd_info *mtd, int page);
+	int (*erase)(struct mtd_info *mtd, int page);
 	int (*scan_bbt)(struct mtd_info *mtd);
 	int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
 			int status, int page);



More information about the linux-mtd-cvs mailing list