mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Sun Jul 13 22:59:01 PDT 2014
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=812c5fa82bae9f377f49000d7636c19a8b61735c
Commit: 812c5fa82bae9f377f49000d7636c19a8b61735c
Parent: 54c39e9ba3a93e3848ad8f9d082c39010cfc5e73
Author: Andrea Adami <andrea.adami at gmail.com>
AuthorDate: Mon Jun 2 23:38:35 2014 +0200
Committer: Brian Norris <computersforpeace at gmail.com>
CommitDate: Sun Jul 13 22:22:47 2014 -0700
mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR
This family of chips was long ago supported by the pre-cfi driver.
CFI code tested on several Zaurus SL-5500 (Collie) 2x16 on 32 bit bus.
Function is_LH28F640BF() mimics is_m29ew() from cmdset_0002.c
Buffer write fixes as seen in 2007 patch c/o
Anti Sullin <anti.sullin <at> artecdesign.ee>
http://comments.gmane.org/gmane.linux.ports.arm.kernel/36733
[Brian: this patch is semi-urgent, because the following patch switches
to using CFI detection for a chip which (until now) is unsupported by
the CFI driver
9218310 ARM: 8084/1: sa1100: collie: revert back to cfi_probe
]
Signed-off-by: Andrea Adami <andrea.adami at gmail.com>
Signed-off-by: Brian Norris <computersforpeace at gmail.com>
---
drivers/mtd/chips/cfi_cmdset_0001.c | 43 +++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index e4ec355..a7543ba 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -52,6 +52,11 @@
/* Atmel chips */
#define AT49BV640D 0x02de
#define AT49BV640DT 0x02db
+/* Sharp chips */
+#define LH28F640BFHE_PTTL90 0x00b0
+#define LH28F640BFHE_PBTL90 0x00b1
+#define LH28F640BFHE_PTTL70A 0x00b2
+#define LH28F640BFHE_PBTL70A 0x00b3
static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
@@ -258,6 +263,36 @@ static void fixup_st_m28w320cb(struct mtd_info *mtd)
(cfi->cfiq->EraseRegionInfo[1] & 0xffff0000) | 0x3e;
};
+static int is_LH28F640BF(struct cfi_private *cfi)
+{
+ /* Sharp LH28F640BF Family */
+ if (cfi->mfr == CFI_MFR_SHARP && (
+ cfi->id == LH28F640BFHE_PTTL90 || cfi->id == LH28F640BFHE_PBTL90 ||
+ cfi->id == LH28F640BFHE_PTTL70A || cfi->id == LH28F640BFHE_PBTL70A))
+ return 1;
+ return 0;
+}
+
+static void fixup_LH28F640BF(struct mtd_info *mtd)
+{
+ struct map_info *map = mtd->priv;
+ struct cfi_private *cfi = map->fldrv_priv;
+ struct cfi_pri_intelext *extp = cfi->cmdset_priv;
+
+ /* Reset the Partition Configuration Register on LH28F640BF
+ * to a single partition (PCR = 0x000): PCR is embedded into A0-A15. */
+ if (is_LH28F640BF(cfi)) {
+ printk(KERN_INFO "Reset Partition Config. Register: 1 Partition of 4 planes\n");
+ map_write(map, CMD(0x60), 0);
+ map_write(map, CMD(0x04), 0);
+
+ /* We have set one single partition thus
+ * Simultaneous Operations are not allowed */
+ printk(KERN_INFO "cfi_cmdset_0001: Simultaneous Operations disabled\n");
+ extp->FeatureSupport &= ~512;
+ }
+}
+
static void fixup_use_point(struct mtd_info *mtd)
{
struct map_info *map = mtd->priv;
@@ -309,6 +344,8 @@ static struct cfi_fixup cfi_fixup_table[] = {
{ CFI_MFR_ST, 0x00ba, /* M28W320CT */ fixup_st_m28w320ct },
{ CFI_MFR_ST, 0x00bb, /* M28W320CB */ fixup_st_m28w320cb },
{ CFI_MFR_INTEL, CFI_ID_ANY, fixup_unlock_powerup_lock },
+ { CFI_MFR_SHARP, CFI_ID_ANY, fixup_unlock_powerup_lock },
+ { CFI_MFR_SHARP, CFI_ID_ANY, fixup_LH28F640BF },
{ 0, 0, NULL }
};
@@ -1649,6 +1686,12 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
initial_adr = adr;
cmd_adr = adr & ~(wbufsize-1);
+ /* Sharp LH28F640BF chips need the first address for the
+ * Page Buffer Program command. See Table 5 of
+ * LH28F320BF, LH28F640BF, LH28F128BF Series (Appendix FUM00701) */
+ if (is_LH28F640BF(cfi))
+ cmd_adr = adr;
+
/* Let's determine this according to the interleave only once */
write_cmd = (cfi->cfiq->P_ID != P_ID_INTEL_PERFORMANCE) ? CMD(0xe8) : CMD(0xe9);
More information about the linux-mtd-cvs
mailing list