mtd: gpmi: change pr_err to dev_err

Linux-MTD Mailing List linux-mtd at lists.infradead.org
Tue Jan 28 00:59:03 EST 2014


Gitweb:     http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=da40c16a72f70329b599bb90a03bc23c8e0e7929
Commit:     da40c16a72f70329b599bb90a03bc23c8e0e7929
Parent:     43a34b8b730b6e12a8824c5bf2145022ed01f74f
Author:     Huang Shijie <b32955 at freescale.com>
AuthorDate: Wed Nov 20 10:09:43 2013 +0800
Committer:  Brian Norris <computersforpeace at gmail.com>
CommitDate: Fri Jan 3 11:22:20 2014 -0800

    mtd: gpmi: change pr_err to dev_err
    
    There are pr_err and dev_err in the gpmi driver now.
    It makes people confused.
    
    This patch changes all the pr_err to dev_err except the one
    in the gpmi_reset_block(). We also remove the unnecessary
    print for OOM message.
    
    Signed-off-by: Huang Shijie <b32955 at freescale.com>
    Signed-off-by: Brian Norris <computersforpeace at gmail.com>
---
 drivers/mtd/nand/gpmi-nand/gpmi-lib.c  | 47 +++++++++++++++++++++-------------
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 44 +++++++++++++++----------------
 2 files changed, 50 insertions(+), 41 deletions(-)

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 45b9a3d..dd1df60 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -208,30 +208,41 @@ void gpmi_dump_info(struct gpmi_nand_data *this)
 	u32 reg;
 	int i;
 
-	pr_err("Show GPMI registers :\n");
+	dev_err(this->dev, "Show GPMI registers :\n");
 	for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) {
 		reg = readl(r->gpmi_regs + i * 0x10);
-		pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+		dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
 	}
 
 	/* start to print out the BCH info */
-	pr_err("Show BCH registers :\n");
+	dev_err(this->dev, "Show BCH registers :\n");
 	for (i = 0; i <= HW_BCH_VERSION / 0x10 + 1; i++) {
 		reg = readl(r->bch_regs + i * 0x10);
-		pr_err("offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+		dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
 	}
-	pr_err("BCH Geometry :\n");
-	pr_err("GF length              : %u\n", geo->gf_len);
-	pr_err("ECC Strength           : %u\n", geo->ecc_strength);
-	pr_err("Page Size in Bytes     : %u\n", geo->page_size);
-	pr_err("Metadata Size in Bytes : %u\n", geo->metadata_size);
-	pr_err("ECC Chunk Size in Bytes: %u\n", geo->ecc_chunk_size);
-	pr_err("ECC Chunk Count        : %u\n", geo->ecc_chunk_count);
-	pr_err("Payload Size in Bytes  : %u\n", geo->payload_size);
-	pr_err("Auxiliary Size in Bytes: %u\n", geo->auxiliary_size);
-	pr_err("Auxiliary Status Offset: %u\n", geo->auxiliary_status_offset);
-	pr_err("Block Mark Byte Offset : %u\n", geo->block_mark_byte_offset);
-	pr_err("Block Mark Bit Offset  : %u\n", geo->block_mark_bit_offset);
+	dev_err(this->dev, "BCH Geometry :\n"
+		"GF length              : %u\n"
+		"ECC Strength           : %u\n"
+		"Page Size in Bytes     : %u\n"
+		"Metadata Size in Bytes : %u\n"
+		"ECC Chunk Size in Bytes: %u\n"
+		"ECC Chunk Count        : %u\n"
+		"Payload Size in Bytes  : %u\n"
+		"Auxiliary Size in Bytes: %u\n"
+		"Auxiliary Status Offset: %u\n"
+		"Block Mark Byte Offset : %u\n"
+		"Block Mark Bit Offset  : %u\n",
+		geo->gf_len,
+		geo->ecc_strength,
+		geo->page_size,
+		geo->metadata_size,
+		geo->ecc_chunk_size,
+		geo->ecc_chunk_count,
+		geo->payload_size,
+		geo->auxiliary_size,
+		geo->auxiliary_status_offset,
+		geo->block_mark_byte_offset,
+		geo->block_mark_bit_offset);
 }
 
 /* Configures the geometry for BCH.  */
@@ -993,7 +1004,7 @@ void gpmi_begin(struct gpmi_nand_data *this)
 	/* Enable the clock. */
 	ret = gpmi_enable_clk(this);
 	if (ret) {
-		pr_err("We failed in enable the clk\n");
+		dev_err(this->dev, "We failed in enable the clk\n");
 		goto err_out;
 	}
 
@@ -1097,7 +1108,7 @@ int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
 		mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
 		reg = readl(r->gpmi_regs + HW_GPMI_STAT);
 	} else
-		pr_err("unknow arch.\n");
+		dev_err(this->dev, "unknow arch.\n");
 	return reg & mask;
 }
 
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 56178767..46544ed 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -385,7 +385,7 @@ void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr)
 
 		ret = dma_map_sg(this->dev, sgl, 1, dr);
 		if (ret == 0)
-			pr_err("DMA mapping failed.\n");
+			dev_err(this->dev, "DMA mapping failed.\n");
 
 		this->direct_dma_map_ok = false;
 	}
@@ -419,7 +419,7 @@ static void dma_irq_callback(void *param)
 		break;
 
 	default:
-		pr_err("in wrong DMA operation.\n");
+		dev_err(this->dev, "in wrong DMA operation.\n");
 	}
 
 	complete(dma_c);
@@ -441,7 +441,8 @@ int start_dma_without_bch_irq(struct gpmi_nand_data *this,
 	/* Wait for the interrupt from the DMA block. */
 	err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
 	if (!err) {
-		pr_err("DMA timeout, last DMA :%d\n", this->last_dma_type);
+		dev_err(this->dev, "DMA timeout, last DMA :%d\n",
+			this->last_dma_type);
 		gpmi_dump_info(this);
 		return -ETIMEDOUT;
 	}
@@ -470,7 +471,8 @@ int start_dma_with_bch_irq(struct gpmi_nand_data *this,
 	/* Wait for the interrupt from the BCH block. */
 	err = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000));
 	if (!err) {
-		pr_err("BCH timeout, last DMA :%d\n", this->last_dma_type);
+		dev_err(this->dev, "BCH timeout, last DMA :%d\n",
+			this->last_dma_type);
 		gpmi_dump_info(this);
 		return -ETIMEDOUT;
 	}
@@ -495,7 +497,7 @@ static int acquire_register_block(struct gpmi_nand_data *this,
 	else if (!strcmp(res_name, GPMI_NAND_BCH_REGS_ADDR_RES_NAME))
 		res->bch_regs = p;
 	else
-		pr_err("unknown resource name : %s\n", res_name);
+		dev_err(this->dev, "unknown resource name : %s\n", res_name);
 
 	return 0;
 }
@@ -509,7 +511,7 @@ static int acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h)
 
 	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
 	if (!r) {
-		pr_err("Can't get resource for %s\n", res_name);
+		dev_err(this->dev, "Can't get resource for %s\n", res_name);
 		return -ENODEV;
 	}
 
@@ -538,7 +540,7 @@ static int acquire_dma_channels(struct gpmi_nand_data *this)
 	/* request dma channel */
 	dma_chan = dma_request_slave_channel(&pdev->dev, "rx-tx");
 	if (!dma_chan) {
-		pr_err("Failed to request DMA channel.\n");
+		dev_err(this->dev, "Failed to request DMA channel.\n");
 		goto acquire_err;
 	}
 
@@ -681,8 +683,7 @@ static int read_page_prepare(struct gpmi_nand_data *this,
 						length, DMA_FROM_DEVICE);
 		if (dma_mapping_error(dev, dest_phys)) {
 			if (alt_size < length) {
-				pr_err("%s, Alternate buffer is too small\n",
-					__func__);
+				dev_err(dev, "Alternate buffer is too small\n");
 				return -ENOMEM;
 			}
 			goto map_failed;
@@ -732,8 +733,7 @@ static int send_page_prepare(struct gpmi_nand_data *this,
 						DMA_TO_DEVICE);
 		if (dma_mapping_error(dev, source_phys)) {
 			if (alt_size < length) {
-				pr_err("%s, Alternate buffer is too small\n",
-					__func__);
+				dev_err(dev, "Alternate buffer is too small\n");
 				return -ENOMEM;
 			}
 			goto map_failed;
@@ -821,7 +821,6 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
 
 error_alloc:
 	gpmi_free_dma_buffer(this);
-	pr_err("Error allocating DMA buffers!\n");
 	return -ENOMEM;
 }
 
@@ -853,7 +852,8 @@ static void gpmi_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
 
 	ret = gpmi_send_command(this);
 	if (ret)
-		pr_err("Chip: %u, Error %d\n", this->current_chip, ret);
+		dev_err(this->dev, "Chip: %u, Error %d\n",
+			this->current_chip, ret);
 
 	this->command_length = 0;
 }
@@ -981,7 +981,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 					nfc_geo->payload_size,
 					&payload_virt, &payload_phys);
 	if (ret) {
-		pr_err("Inadequate DMA buffer\n");
+		dev_err(this->dev, "Inadequate DMA buffer\n");
 		ret = -ENOMEM;
 		return ret;
 	}
@@ -995,7 +995,7 @@ static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 			nfc_geo->payload_size,
 			payload_virt, payload_phys);
 	if (ret) {
-		pr_err("Error in ECC-based read: %d\n", ret);
+		dev_err(this->dev, "Error in ECC-based read: %d\n", ret);
 		return ret;
 	}
 
@@ -1081,7 +1081,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 				nfc_geo->payload_size,
 				&payload_virt, &payload_phys);
 		if (ret) {
-			pr_err("Inadequate payload DMA buffer\n");
+			dev_err(this->dev, "Inadequate payload DMA buffer\n");
 			return 0;
 		}
 
@@ -1091,7 +1091,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 				nfc_geo->auxiliary_size,
 				&auxiliary_virt, &auxiliary_phys);
 		if (ret) {
-			pr_err("Inadequate auxiliary DMA buffer\n");
+			dev_err(this->dev, "Inadequate auxiliary DMA buffer\n");
 			goto exit_auxiliary;
 		}
 	}
@@ -1099,7 +1099,7 @@ static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 	/* Ask the NFC. */
 	ret = gpmi_send_page(this, payload_phys, auxiliary_phys);
 	if (ret)
-		pr_err("Error in ECC-based write: %d\n", ret);
+		dev_err(this->dev, "Error in ECC-based write: %d\n", ret);
 
 	if (!this->swap_block_mark) {
 		send_page_end(this, chip->oob_poi, mtd->oobsize,
@@ -1516,7 +1516,7 @@ static int gpmi_set_geometry(struct gpmi_nand_data *this)
 	/* Set up the NFC geometry which is used by BCH. */
 	ret = bch_set_geometry(this);
 	if (ret) {
-		pr_err("Error setting BCH geometry : %d\n", ret);
+		dev_err(this->dev, "Error setting BCH geometry : %d\n", ret);
 		return ret;
 	}
 
@@ -1666,15 +1666,13 @@ static int gpmi_nand_probe(struct platform_device *pdev)
 	if (of_id) {
 		pdev->id_entry = of_id->data;
 	} else {
-		pr_err("Failed to find the right device id.\n");
+		dev_err(&pdev->dev, "Failed to find the right device id.\n");
 		return -ENODEV;
 	}
 
 	this = devm_kzalloc(&pdev->dev, sizeof(*this), GFP_KERNEL);
-	if (!this) {
-		pr_err("Failed to allocate per-device memory\n");
+	if (!this)
 		return -ENOMEM;
-	}
 
 	platform_set_drvdata(pdev, this);
 	this->pdev  = pdev;



More information about the linux-mtd-cvs mailing list