mtd: atmel_nand: NFC: support multiple interrupt handling
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Fri Aug 8 09:59:03 PDT 2014
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=e4e069347030ab0fea7304d06704fb3b64e5fe40
Commit: e4e069347030ab0fea7304d06704fb3b64e5fe40
Parent: 72a78e3cd2c02c46ce5a3b89a2a854199e5a4820
Author: Josh Wu <Josh.wu at atmel.com>
AuthorDate: Tue Jun 10 17:50:11 2014 +0800
Committer: Brian Norris <computersforpeace at gmail.com>
CommitDate: Mon Jul 21 20:05:36 2014 -0700
mtd: atmel_nand: NFC: support multiple interrupt handling
Fix the following error, which sometimes happens during the NFC data
transfer:
atmel_nand 80000000.nand: Time out to wait for interrupt: 0x00010000
atmel_nand 80000000.nand: something wrong, No XFR_DONE interrupt comes.
The root cause is that in the interrupt handler, we read the ISR but
only handle one interrupt. If more than one interrupt arrive at the same
time, then the second one will be lost.
During the NFC data transfer. Two NFC interrupts (NFC_CMD_DONE and
NFC_XFR_DONE) may come at the same time.
NFC_CMD_DONE means NFC command is sent, and NFC_XFR_DONE means NFC data
is transferred.
This patch can handle multiple NFC interrupts at the same time. During
the NFC data transfer, we need to wait for two NFC interrupts:
NFC_CMD_DONE and NFC_XFR_DONE.
Also we separate the completion initialization code to a
nfc_prepare_interrupt(), which is paired with nfc_wait_interrupt().
We call nfc_prepare_interrupt() before sending out nfc commands, to make
sure no interrupt lost.
Reported-by: Matthieu CRAPET <Matthieu.CRAPET at ingenico.com>
Tested-by: Matthieu Crapet <Matthieu.Crapet at ingenico.com>
Signed-off-by: Josh Wu <josh.wu at atmel.com>
Signed-off-by: Brian Norris <computersforpeace at gmail.com>
---
drivers/mtd/nand/atmel_nand.c | 84 +++++++++++++++++++++++++++++++------------
1 file changed, 62 insertions(+), 22 deletions(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 459acf0..e321c56 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -97,7 +97,9 @@ struct atmel_nfc {
bool write_by_sram;
bool is_initialized;
- struct completion comp_nfc;
+ struct completion comp_ready;
+ struct completion comp_cmd_done;
+ struct completion comp_xfer_done;
/* Point to the sram bank which include readed data via NFC */
void __iomem *data_in_sram;
@@ -1596,44 +1598,80 @@ static irqreturn_t hsmc_interrupt(int irq, void *dev_id)
{
struct atmel_nand_host *host = dev_id;
u32 status, mask, pending;
- irqreturn_t ret = IRQ_HANDLED;
+ irqreturn_t ret = IRQ_NONE;
status = nfc_read_status(host);
mask = nfc_readl(host->nfc->hsmc_regs, IMR);
pending = status & mask;
if (pending & NFC_SR_XFR_DONE) {
- complete(&host->nfc->comp_nfc);
+ complete(&host->nfc->comp_xfer_done);
nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_XFR_DONE);
- } else if (pending & NFC_SR_RB_EDGE) {
- complete(&host->nfc->comp_nfc);
+ ret = IRQ_HANDLED;
+ }
+ if (pending & NFC_SR_RB_EDGE) {
+ complete(&host->nfc->comp_ready);
nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_RB_EDGE);
- } else if (pending & NFC_SR_CMD_DONE) {
- complete(&host->nfc->comp_nfc);
+ ret = IRQ_HANDLED;
+ }
+ if (pending & NFC_SR_CMD_DONE) {
+ complete(&host->nfc->comp_cmd_done);
nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_CMD_DONE);
- } else {
- ret = IRQ_NONE;
+ ret = IRQ_HANDLED;
}
return ret;
}
/* NFC(Nand Flash Controller) related functions */
-static int nfc_wait_interrupt(struct atmel_nand_host *host, u32 flag)
+static void nfc_prepare_interrupt(struct atmel_nand_host *host, u32 flag)
{
- unsigned long timeout;
- init_completion(&host->nfc->comp_nfc);
+ if (flag & NFC_SR_XFR_DONE)
+ init_completion(&host->nfc->comp_xfer_done);
+
+ if (flag & NFC_SR_RB_EDGE)
+ init_completion(&host->nfc->comp_ready);
+
+ if (flag & NFC_SR_CMD_DONE)
+ init_completion(&host->nfc->comp_cmd_done);
/* Enable interrupt that need to wait for */
nfc_writel(host->nfc->hsmc_regs, IER, flag);
+}
- timeout = wait_for_completion_timeout(&host->nfc->comp_nfc,
- msecs_to_jiffies(NFC_TIME_OUT_MS));
- if (timeout)
- return 0;
+static int nfc_wait_interrupt(struct atmel_nand_host *host, u32 flag)
+{
+ int i, index = 0;
+ struct completion *comp[3]; /* Support 3 interrupt completion */
+
+ if (flag & NFC_SR_XFR_DONE)
+ comp[index++] = &host->nfc->comp_xfer_done;
+
+ if (flag & NFC_SR_RB_EDGE)
+ comp[index++] = &host->nfc->comp_ready;
- /* Time out to wait for the interrupt */
+ if (flag & NFC_SR_CMD_DONE)
+ comp[index++] = &host->nfc->comp_cmd_done;
+
+ if (index == 0) {
+ dev_err(host->dev, "Unkown interrupt flag: 0x%08x\n", flag);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < index; i++) {
+ if (wait_for_completion_timeout(comp[i],
+ msecs_to_jiffies(NFC_TIME_OUT_MS)))
+ continue; /* wait for next completion */
+ else
+ goto err_timeout;
+ }
+
+ return 0;
+
+err_timeout:
dev_err(host->dev, "Time out to wait for interrupt: 0x%08x\n", flag);
+ /* Disable the interrupt as it is not handled by interrupt handler */
+ nfc_writel(host->nfc->hsmc_regs, IDR, flag);
return -ETIMEDOUT;
}
@@ -1641,6 +1679,9 @@ static int nfc_send_command(struct atmel_nand_host *host,
unsigned int cmd, unsigned int addr, unsigned char cycle0)
{
unsigned long timeout;
+ u32 flag = NFC_SR_CMD_DONE;
+ flag |= cmd & NFCADDR_CMD_DATAEN ? NFC_SR_XFR_DONE : 0;
+
dev_dbg(host->dev,
"nfc_cmd: 0x%08x, addr1234: 0x%08x, cycle0: 0x%02x\n",
cmd, addr, cycle0);
@@ -1654,9 +1695,11 @@ static int nfc_send_command(struct atmel_nand_host *host,
return -ETIMEDOUT;
}
}
+
+ nfc_prepare_interrupt(host, flag);
nfc_writel(host->nfc->hsmc_regs, CYCLE0, cycle0);
nfc_cmd_addr1234_writel(cmd, addr, host->nfc->base_cmd_regs);
- return nfc_wait_interrupt(host, NFC_SR_CMD_DONE);
+ return nfc_wait_interrupt(host, flag);
}
static int nfc_device_ready(struct mtd_info *mtd)
@@ -1822,10 +1865,6 @@ static void nfc_nand_command(struct mtd_info *mtd, unsigned int command,
nfc_addr_cmd = cmd1 | cmd2 | vcmd2 | acycle | csid | dataen | nfcwr;
nfc_send_command(host, nfc_addr_cmd, addr1234, cycle0);
- if (dataen == NFCADDR_CMD_DATAEN)
- if (nfc_wait_interrupt(host, NFC_SR_XFR_DONE))
- dev_err(host->dev, "something wrong, No XFR_DONE interrupt comes.\n");
-
/*
* Program and erase have their own busy handlers status, sequential
* in, and deplete1 need no delay.
@@ -1850,6 +1889,7 @@ static void nfc_nand_command(struct mtd_info *mtd, unsigned int command,
}
/* fall through */
default:
+ nfc_prepare_interrupt(host, NFC_SR_RB_EDGE);
nfc_wait_interrupt(host, NFC_SR_RB_EDGE);
}
}
More information about the linux-mtd-cvs
mailing list