hwmon: (nct6775) Monitor additional temperature registers
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Fri Nov 22 17:59:07 EST 2013
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=d1a284b7ed8124599e3b747fb2b86311761fb609
Commit: d1a284b7ed8124599e3b747fb2b86311761fb609
Parent: c98d6c65e6e6bd24a12174fff6ca4990d346de5d
Author: Guenter Roeck <linux at roeck-us.net>
AuthorDate: Wed Nov 13 12:46:20 2013 -0800
Committer: Guenter Roeck <linux at roeck-us.net>
CommitDate: Mon Nov 18 14:08:05 2013 -0800
hwmon: (nct6775) Monitor additional temperature registers
The number of SMIOVT registers on NCT6779 and NCT6791 is limited to 2.
As result, the driver may not report some of the temperatures used
for fan control. This can result in some of the pwmX_temp_sel or
pwm2_weight_temp_sel attributes to wrongly return 0.
Fortunately, the chip has registers to monitor those temperatures.
Add them to the list of temperatures to report.
Signed-off-by: Guenter Roeck <linux at roeck-us.net>
---
drivers/hwmon/nct6775.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 60 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index d17325d..3f4ef21 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -274,6 +274,8 @@ static const u16 NCT6775_FAN_PULSE_SHIFT[] = { 0, 0, 0, 0, 0, 0 };
static const u16 NCT6775_REG_TEMP[] = {
0x27, 0x150, 0x250, 0x62b, 0x62c, 0x62d };
+static const u16 NCT6775_REG_TEMP_MON[] = { 0x73, 0x75, 0x77 };
+
static const u16 NCT6775_REG_TEMP_CONFIG[ARRAY_SIZE(NCT6775_REG_TEMP)] = {
0, 0x152, 0x252, 0x628, 0x629, 0x62A };
static const u16 NCT6775_REG_TEMP_HYST[ARRAY_SIZE(NCT6775_REG_TEMP)] = {
@@ -454,6 +456,7 @@ static const u16 NCT6779_REG_CRITICAL_PWM[] = {
0x137, 0x237, 0x337, 0x837, 0x937, 0xa37 };
static const u16 NCT6779_REG_TEMP[] = { 0x27, 0x150 };
+static const u16 NCT6779_REG_TEMP_MON[] = { 0x73, 0x75, 0x77, 0x79, 0x7b };
static const u16 NCT6779_REG_TEMP_CONFIG[ARRAY_SIZE(NCT6779_REG_TEMP)] = {
0x18, 0x152 };
static const u16 NCT6779_REG_TEMP_HYST[ARRAY_SIZE(NCT6779_REG_TEMP)] = {
@@ -534,6 +537,7 @@ static const u16 NCT6106_REG_IN[] = {
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x07, 0x08, 0x09 };
static const u16 NCT6106_REG_TEMP[] = { 0x10, 0x11, 0x12, 0x13, 0x14, 0x15 };
+static const u16 NCT6106_REG_TEMP_MON[] = { 0x18, 0x19, 0x1a };
static const u16 NCT6106_REG_TEMP_HYST[] = {
0xc3, 0xc7, 0xcb, 0xcf, 0xd3, 0xd7 };
static const u16 NCT6106_REG_TEMP_OVER[] = {
@@ -3253,9 +3257,9 @@ static int nct6775_probe(struct platform_device *pdev)
int i, s, err = 0;
int src, mask, available;
const u16 *reg_temp, *reg_temp_over, *reg_temp_hyst, *reg_temp_config;
- const u16 *reg_temp_alternate, *reg_temp_crit;
+ const u16 *reg_temp_mon, *reg_temp_alternate, *reg_temp_crit;
const u16 *reg_temp_crit_l = NULL, *reg_temp_crit_h = NULL;
- int num_reg_temp;
+ int num_reg_temp, num_reg_temp_mon;
u8 cr2a;
struct attribute_group *group;
struct device *hwmon_dev;
@@ -3338,7 +3342,9 @@ static int nct6775_probe(struct platform_device *pdev)
data->BEEP_BITS = NCT6106_BEEP_BITS;
reg_temp = NCT6106_REG_TEMP;
+ reg_temp_mon = NCT6106_REG_TEMP_MON;
num_reg_temp = ARRAY_SIZE(NCT6106_REG_TEMP);
+ num_reg_temp_mon = ARRAY_SIZE(NCT6106_REG_TEMP_MON);
reg_temp_over = NCT6106_REG_TEMP_OVER;
reg_temp_hyst = NCT6106_REG_TEMP_HYST;
reg_temp_config = NCT6106_REG_TEMP_CONFIG;
@@ -3410,7 +3416,9 @@ static int nct6775_probe(struct platform_device *pdev)
data->REG_BEEP = NCT6775_REG_BEEP;
reg_temp = NCT6775_REG_TEMP;
+ reg_temp_mon = NCT6775_REG_TEMP_MON;
num_reg_temp = ARRAY_SIZE(NCT6775_REG_TEMP);
+ num_reg_temp_mon = ARRAY_SIZE(NCT6775_REG_TEMP_MON);
reg_temp_over = NCT6775_REG_TEMP_OVER;
reg_temp_hyst = NCT6775_REG_TEMP_HYST;
reg_temp_config = NCT6775_REG_TEMP_CONFIG;
@@ -3480,7 +3488,9 @@ static int nct6775_probe(struct platform_device *pdev)
data->REG_BEEP = NCT6776_REG_BEEP;
reg_temp = NCT6775_REG_TEMP;
+ reg_temp_mon = NCT6775_REG_TEMP_MON;
num_reg_temp = ARRAY_SIZE(NCT6775_REG_TEMP);
+ num_reg_temp_mon = ARRAY_SIZE(NCT6775_REG_TEMP_MON);
reg_temp_over = NCT6775_REG_TEMP_OVER;
reg_temp_hyst = NCT6775_REG_TEMP_HYST;
reg_temp_config = NCT6776_REG_TEMP_CONFIG;
@@ -3554,7 +3564,9 @@ static int nct6775_probe(struct platform_device *pdev)
data->REG_BEEP = NCT6776_REG_BEEP;
reg_temp = NCT6779_REG_TEMP;
+ reg_temp_mon = NCT6779_REG_TEMP_MON;
num_reg_temp = ARRAY_SIZE(NCT6779_REG_TEMP);
+ num_reg_temp_mon = ARRAY_SIZE(NCT6779_REG_TEMP_MON);
reg_temp_over = NCT6779_REG_TEMP_OVER;
reg_temp_hyst = NCT6779_REG_TEMP_HYST;
reg_temp_config = NCT6779_REG_TEMP_CONFIG;
@@ -3628,7 +3640,9 @@ static int nct6775_probe(struct platform_device *pdev)
data->REG_BEEP = NCT6776_REG_BEEP;
reg_temp = NCT6779_REG_TEMP;
+ reg_temp_mon = NCT6779_REG_TEMP_MON;
num_reg_temp = ARRAY_SIZE(NCT6779_REG_TEMP);
+ num_reg_temp_mon = ARRAY_SIZE(NCT6779_REG_TEMP_MON);
reg_temp_over = NCT6779_REG_TEMP_OVER;
reg_temp_hyst = NCT6779_REG_TEMP_HYST;
reg_temp_config = NCT6779_REG_TEMP_CONFIG;
@@ -3729,6 +3743,50 @@ static int nct6775_probe(struct platform_device *pdev)
s++;
}
+ /*
+ * Repeat with temperatures used for fan control.
+ * This set of registers does not support limits.
+ */
+ for (i = 0; i < num_reg_temp_mon; i++) {
+ if (reg_temp_mon[i] == 0)
+ continue;
+
+ src = nct6775_read_value(data, data->REG_TEMP_SEL[i]) & 0x1f;
+ if (!src || (mask & (1 << src)))
+ continue;
+
+ if (src >= data->temp_label_num ||
+ !strlen(data->temp_label[src])) {
+ dev_info(dev,
+ "Invalid temperature source %d at index %d, source register 0x%x, temp register 0x%x\n",
+ src, i, data->REG_TEMP_SEL[i],
+ reg_temp_mon[i]);
+ continue;
+ }
+
+ mask |= 1 << src;
+
+ /* Use fixed index for SYSTIN(1), CPUTIN(2), AUXTIN(3) */
+ if (src <= data->temp_fixed_num) {
+ if (data->have_temp & (1 << (src - 1)))
+ continue;
+ data->have_temp |= 1 << (src - 1);
+ data->have_temp_fixed |= 1 << (src - 1);
+ data->reg_temp[0][src - 1] = reg_temp_mon[i];
+ data->temp_src[src - 1] = src;
+ continue;
+ }
+
+ if (s >= NUM_TEMP)
+ continue;
+
+ /* Use dynamic index for other sources */
+ data->have_temp |= 1 << s;
+ data->reg_temp[0][s] = reg_temp_mon[i];
+ data->temp_src[s] = src;
+ s++;
+ }
+
#ifdef USE_ALTERNATE
/*
* Go through the list of alternate temp registers and enable
More information about the linux-mtd-cvs
mailing list