mtd: nand: use a local variable to simplify the nand_scan_tail
Linux-MTD Mailing List
linux-mtd at lists.infradead.org
Wed Nov 13 13:59:06 EST 2013
Gitweb: http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=97de79e02d5e85b4a147b74cc2947b8613d806f7
Commit: 97de79e02d5e85b4a147b74cc2947b8613d806f7
Parent: b1eb234fb38dd1b6fb86969bf8f27348e4ec4c74
Author: Huang Shijie <b32955 at freescale.com>
AuthorDate: Fri Oct 18 14:20:53 2013 +0800
Committer: Brian Norris <computersforpeace at gmail.com>
CommitDate: Thu Nov 7 00:08:56 2013 -0800
mtd: nand: use a local variable to simplify the nand_scan_tail
There are too many "chip->ecc" in the nand_scan_tail() which makes the eyes
sore.
This patch uses a local variable "ecc" to replace the "chip->ecc" to
make the code more graceful.
Do the code change with "s/chip->ecc\./ecc->/g" in the nand_scan_tail,
and also change some lines by hand.
Signed-off-by: Huang Shijie <b32955 at freescale.com>
Signed-off-by: Brian Norris <computersforpeace at gmail.com>
---
drivers/mtd/nand/nand_base.c | 213 +++++++++++++++++++++----------------------
1 file changed, 104 insertions(+), 109 deletions(-)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ec1db1e..bd39f7b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3558,6 +3558,7 @@ int nand_scan_tail(struct mtd_info *mtd)
{
int i;
struct nand_chip *chip = mtd->priv;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
/* New bad blocks should be marked in OOB, flash-based BBT, or both */
BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
@@ -3574,19 +3575,19 @@ int nand_scan_tail(struct mtd_info *mtd)
/*
* If no default placement scheme is given, select an appropriate one.
*/
- if (!chip->ecc.layout && (chip->ecc.mode != NAND_ECC_SOFT_BCH)) {
+ if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
switch (mtd->oobsize) {
case 8:
- chip->ecc.layout = &nand_oob_8;
+ ecc->layout = &nand_oob_8;
break;
case 16:
- chip->ecc.layout = &nand_oob_16;
+ ecc->layout = &nand_oob_16;
break;
case 64:
- chip->ecc.layout = &nand_oob_64;
+ ecc->layout = &nand_oob_64;
break;
case 128:
- chip->ecc.layout = &nand_oob_128;
+ ecc->layout = &nand_oob_128;
break;
default:
pr_warn("No oob scheme defined for oobsize %d\n",
@@ -3603,64 +3604,62 @@ int nand_scan_tail(struct mtd_info *mtd)
* selected and we have 256 byte pagesize fallback to software ECC
*/
- switch (chip->ecc.mode) {
+ switch (ecc->mode) {
case NAND_ECC_HW_OOB_FIRST:
/* Similar to NAND_ECC_HW, but a separate read_page handle */
- if (!chip->ecc.calculate || !chip->ecc.correct ||
- !chip->ecc.hwctl) {
+ if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
pr_warn("No ECC functions supplied; "
"hardware ECC not possible\n");
BUG();
}
- if (!chip->ecc.read_page)
- chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_hwecc_oob_first;
case NAND_ECC_HW:
/* Use standard hwecc read page function? */
- if (!chip->ecc.read_page)
- chip->ecc.read_page = nand_read_page_hwecc;
- if (!chip->ecc.write_page)
- chip->ecc.write_page = nand_write_page_hwecc;
- if (!chip->ecc.read_page_raw)
- chip->ecc.read_page_raw = nand_read_page_raw;
- if (!chip->ecc.write_page_raw)
- chip->ecc.write_page_raw = nand_write_page_raw;
- if (!chip->ecc.read_oob)
- chip->ecc.read_oob = nand_read_oob_std;
- if (!chip->ecc.write_oob)
- chip->ecc.write_oob = nand_write_oob_std;
- if (!chip->ecc.read_subpage)
- chip->ecc.read_subpage = nand_read_subpage;
- if (!chip->ecc.write_subpage)
- chip->ecc.write_subpage = nand_write_subpage_hwecc;
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_hwecc;
+ if (!ecc->write_page)
+ ecc->write_page = nand_write_page_hwecc;
+ if (!ecc->read_page_raw)
+ ecc->read_page_raw = nand_read_page_raw;
+ if (!ecc->write_page_raw)
+ ecc->write_page_raw = nand_write_page_raw;
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_std;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_std;
+ if (!ecc->read_subpage)
+ ecc->read_subpage = nand_read_subpage;
+ if (!ecc->write_subpage)
+ ecc->write_subpage = nand_write_subpage_hwecc;
case NAND_ECC_HW_SYNDROME:
- if ((!chip->ecc.calculate || !chip->ecc.correct ||
- !chip->ecc.hwctl) &&
- (!chip->ecc.read_page ||
- chip->ecc.read_page == nand_read_page_hwecc ||
- !chip->ecc.write_page ||
- chip->ecc.write_page == nand_write_page_hwecc)) {
+ if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
+ (!ecc->read_page ||
+ ecc->read_page == nand_read_page_hwecc ||
+ !ecc->write_page ||
+ ecc->write_page == nand_write_page_hwecc)) {
pr_warn("No ECC functions supplied; "
"hardware ECC not possible\n");
BUG();
}
/* Use standard syndrome read/write page function? */
- if (!chip->ecc.read_page)
- chip->ecc.read_page = nand_read_page_syndrome;
- if (!chip->ecc.write_page)
- chip->ecc.write_page = nand_write_page_syndrome;
- if (!chip->ecc.read_page_raw)
- chip->ecc.read_page_raw = nand_read_page_raw_syndrome;
- if (!chip->ecc.write_page_raw)
- chip->ecc.write_page_raw = nand_write_page_raw_syndrome;
- if (!chip->ecc.read_oob)
- chip->ecc.read_oob = nand_read_oob_syndrome;
- if (!chip->ecc.write_oob)
- chip->ecc.write_oob = nand_write_oob_syndrome;
-
- if (mtd->writesize >= chip->ecc.size) {
- if (!chip->ecc.strength) {
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_syndrome;
+ if (!ecc->write_page)
+ ecc->write_page = nand_write_page_syndrome;
+ if (!ecc->read_page_raw)
+ ecc->read_page_raw = nand_read_page_raw_syndrome;
+ if (!ecc->write_page_raw)
+ ecc->write_page_raw = nand_write_page_raw_syndrome;
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_syndrome;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_syndrome;
+
+ if (mtd->writesize >= ecc->size) {
+ if (!ecc->strength) {
pr_warn("Driver must set ecc.strength when using hardware ECC\n");
BUG();
}
@@ -3668,23 +3667,23 @@ int nand_scan_tail(struct mtd_info *mtd)
}
pr_warn("%d byte HW ECC not possible on "
"%d byte page size, fallback to SW ECC\n",
- chip->ecc.size, mtd->writesize);
- chip->ecc.mode = NAND_ECC_SOFT;
+ ecc->size, mtd->writesize);
+ ecc->mode = NAND_ECC_SOFT;
case NAND_ECC_SOFT:
- chip->ecc.calculate = nand_calculate_ecc;
- chip->ecc.correct = nand_correct_data;
- chip->ecc.read_page = nand_read_page_swecc;
- chip->ecc.read_subpage = nand_read_subpage;
- chip->ecc.write_page = nand_write_page_swecc;
- chip->ecc.read_page_raw = nand_read_page_raw;
- chip->ecc.write_page_raw = nand_write_page_raw;
- chip->ecc.read_oob = nand_read_oob_std;
- chip->ecc.write_oob = nand_write_oob_std;
- if (!chip->ecc.size)
- chip->ecc.size = 256;
- chip->ecc.bytes = 3;
- chip->ecc.strength = 1;
+ ecc->calculate = nand_calculate_ecc;
+ ecc->correct = nand_correct_data;
+ ecc->read_page = nand_read_page_swecc;
+ ecc->read_subpage = nand_read_subpage;
+ ecc->write_page = nand_write_page_swecc;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->write_oob = nand_write_oob_std;
+ if (!ecc->size)
+ ecc->size = 256;
+ ecc->bytes = 3;
+ ecc->strength = 1;
break;
case NAND_ECC_SOFT_BCH:
@@ -3692,87 +3691,83 @@ int nand_scan_tail(struct mtd_info *mtd)
pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
BUG();
}
- chip->ecc.calculate = nand_bch_calculate_ecc;
- chip->ecc.correct = nand_bch_correct_data;
- chip->ecc.read_page = nand_read_page_swecc;
- chip->ecc.read_subpage = nand_read_subpage;
- chip->ecc.write_page = nand_write_page_swecc;
- chip->ecc.read_page_raw = nand_read_page_raw;
- chip->ecc.write_page_raw = nand_write_page_raw;
- chip->ecc.read_oob = nand_read_oob_std;
- chip->ecc.write_oob = nand_write_oob_std;
+ ecc->calculate = nand_bch_calculate_ecc;
+ ecc->correct = nand_bch_correct_data;
+ ecc->read_page = nand_read_page_swecc;
+ ecc->read_subpage = nand_read_subpage;
+ ecc->write_page = nand_write_page_swecc;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->write_oob = nand_write_oob_std;
/*
* Board driver should supply ecc.size and ecc.bytes values to
* select how many bits are correctable; see nand_bch_init()
* for details. Otherwise, default to 4 bits for large page
* devices.
*/
- if (!chip->ecc.size && (mtd->oobsize >= 64)) {
- chip->ecc.size = 512;
- chip->ecc.bytes = 7;
+ if (!ecc->size && (mtd->oobsize >= 64)) {
+ ecc->size = 512;
+ ecc->bytes = 7;
}
- chip->ecc.priv = nand_bch_init(mtd,
- chip->ecc.size,
- chip->ecc.bytes,
- &chip->ecc.layout);
- if (!chip->ecc.priv) {
+ ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
+ &ecc->layout);
+ if (!ecc->priv) {
pr_warn("BCH ECC initialization failed!\n");
BUG();
}
- chip->ecc.strength =
- chip->ecc.bytes * 8 / fls(8 * chip->ecc.size);
+ ecc->strength = ecc->bytes * 8 / fls(8 * ecc->size);
break;
case NAND_ECC_NONE:
pr_warn("NAND_ECC_NONE selected by board driver. "
"This is not recommended!\n");
- chip->ecc.read_page = nand_read_page_raw;
- chip->ecc.write_page = nand_write_page_raw;
- chip->ecc.read_oob = nand_read_oob_std;
- chip->ecc.read_page_raw = nand_read_page_raw;
- chip->ecc.write_page_raw = nand_write_page_raw;
- chip->ecc.write_oob = nand_write_oob_std;
- chip->ecc.size = mtd->writesize;
- chip->ecc.bytes = 0;
- chip->ecc.strength = 0;
+ ecc->read_page = nand_read_page_raw;
+ ecc->write_page = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->write_oob = nand_write_oob_std;
+ ecc->size = mtd->writesize;
+ ecc->bytes = 0;
+ ecc->strength = 0;
break;
default:
- pr_warn("Invalid NAND_ECC_MODE %d\n", chip->ecc.mode);
+ pr_warn("Invalid NAND_ECC_MODE %d\n", ecc->mode);
BUG();
}
/* For many systems, the standard OOB write also works for raw */
- if (!chip->ecc.read_oob_raw)
- chip->ecc.read_oob_raw = chip->ecc.read_oob;
- if (!chip->ecc.write_oob_raw)
- chip->ecc.write_oob_raw = chip->ecc.write_oob;
+ if (!ecc->read_oob_raw)
+ ecc->read_oob_raw = ecc->read_oob;
+ if (!ecc->write_oob_raw)
+ ecc->write_oob_raw = ecc->write_oob;
/*
* The number of bytes available for a client to place data into
* the out of band area.
*/
- chip->ecc.layout->oobavail = 0;
- for (i = 0; chip->ecc.layout->oobfree[i].length
- && i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++)
- chip->ecc.layout->oobavail +=
- chip->ecc.layout->oobfree[i].length;
- mtd->oobavail = chip->ecc.layout->oobavail;
+ ecc->layout->oobavail = 0;
+ for (i = 0; ecc->layout->oobfree[i].length
+ && i < ARRAY_SIZE(ecc->layout->oobfree); i++)
+ ecc->layout->oobavail += ecc->layout->oobfree[i].length;
+ mtd->oobavail = ecc->layout->oobavail;
/*
* Set the number of read / write steps for one page depending on ECC
* mode.
*/
- chip->ecc.steps = mtd->writesize / chip->ecc.size;
- if (chip->ecc.steps * chip->ecc.size != mtd->writesize) {
+ ecc->steps = mtd->writesize / ecc->size;
+ if (ecc->steps * ecc->size != mtd->writesize) {
pr_warn("Invalid ECC parameters\n");
BUG();
}
- chip->ecc.total = chip->ecc.steps * chip->ecc.bytes;
+ ecc->total = ecc->steps * ecc->bytes;
/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
- switch (chip->ecc.steps) {
+ switch (ecc->steps) {
case 2:
mtd->subpage_sft = 1;
break;
@@ -3792,7 +3787,7 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->pagebuf = -1;
/* Large page NAND with SOFT_ECC should support subpage reads */
- if ((chip->ecc.mode == NAND_ECC_SOFT) && (chip->page_shift > 9))
+ if ((ecc->mode == NAND_ECC_SOFT) && (chip->page_shift > 9))
chip->options |= NAND_SUBPAGE_READ;
/* Fill in remaining MTD driver data */
@@ -3817,9 +3812,9 @@ int nand_scan_tail(struct mtd_info *mtd)
mtd->writebufsize = mtd->writesize;
/* propagate ecc info to mtd_info */
- mtd->ecclayout = chip->ecc.layout;
- mtd->ecc_strength = chip->ecc.strength;
- mtd->ecc_step_size = chip->ecc.size;
+ mtd->ecclayout = ecc->layout;
+ mtd->ecc_strength = ecc->strength;
+ mtd->ecc_step_size = ecc->size;
/*
* Initialize bitflip_threshold to its default prior scan_bbt() call.
* scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
More information about the linux-mtd-cvs
mailing list