mtd: m25p80: remove obsolete FIXME

[Linux-MTD Mailing List]

Gitweb:     http://git.infradead.org/?p=mtd-2.6.git;a=commit;h=1a874e91018ea99d7f012a0824669aa9ed833d6f
Commit:     1a874e91018ea99d7f012a0824669aa9ed833d6f
Parent:     778d226a1462572b51d6777cdb1d611543410cb4
Author:     Brian Norris <computersforpeace at gmail.com>
AuthorDate: Mon Jul 29 23:57:57 2013 -0700
Committer:  Brian Norris <computersforpeace at gmail.com>
CommitDate: Wed Nov 6 23:33:04 2013 -0800

    mtd: m25p80: remove obsolete FIXME
    
    The FIXME and NOTE have already been fixed (we have FAST_READ support).
    
    Signed-off-by: Brian Norris <computersforpeace at gmail.com>
    Reviewed-by: Sourav Poddar <sourav.poddar at ti.com>
    Acked-by: Marek Vasut <marex at denx.de>
---
 drivers/mtd/devices/m25p80.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 63a95ac..7c4cbad 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -367,10 +367,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 	spi_message_init(&m);
 	memset(t, 0, (sizeof t));
 
-	/* NOTE:
-	 * OPCODE_FAST_READ (if available) is faster.
-	 * Should add 1 byte DUMMY_BYTE.
-	 */
 	t[0].tx_buf = flash->command;
 	t[0].len = m25p_cmdsz(flash) + (flash->fast_read ? 1 : 0);
 	spi_message_add_tail(&t[0], &m);
@@ -388,11 +384,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
 		return 1;
 	}
 
-	/* FIXME switch to OPCODE_FAST_READ.  It's required for higher
-	 * clocks; and at this writing, every chip this driver handles
-	 * supports that opcode.
-	 */
-
 	/* Set up the write data buffer. */
 	opcode = flash->read_opcode;
 	flash->command[0] = opcode;